10 Dip Switch Style 310mhz Visor Clip Remote for Stanley 310MHz 10 Dip Switch Receiver
IMPORTANT NOTE: This remote only compatible with Stanley, Multi-Code, Heddolf, Digi-Code garage receivers features 10 dip switch, 310MHZ frequency. Other brand, frequency and dip switch will not work.
Only compatible with the following models on 310MHz 10 Dip Switches:
Stanley: 1038, 1040, 1044, 1047, 1049, 1050, 1076, 1079, 1082, 1100, 24911, 51-4271, 51-4272, 51-4273, 51-4369, 51-4726, 105015, 308302, 108210, 109410, 109710, 308913, 1050-T
Digi-Code: 5012, 5062, 5032, 5042, 5072
Heddolf: S219, S220
Program with your 310 MHz Stanley Receiver:
SELECTING A CODE
You may set your transmitter to any code you desire but be sure that the code you set matches the code that has been set on your radio receiver. The digital code is determined by the positions of the 10 small switches numbered 1 through 10 located in the receiver and transmitter. Any combination of ON (CLOSED) or OFF (OPEN) positions can be selected by using a small screwdriver or ball point pen.
Set our remote on the same position on your original transmitter or receiver DIP switch position.
TIPS: Normally, you only need to set the DIP Switches of our remote control to the same position as your original remote control, from "1" to "10". If this doesn't work, please try to set it to the opposite position to your original remote control. Because original remote or receiver may use the different dip switch.
For example, if the your original remote control or receiver at switch "1" is "ON", then set our remote control to "OFF" (the side next to the number), and so on, until all 10 DIP Switches are set.
Product Details:
Frequency: 310 MHz
10 position dip switch visor clip remote
Program with Stanley receivers and transmitters
Material: ABS Plastic, Black Case
Battery Type: 12V 23A Alkaline Battery