1 RV TRAILER CAMPER KEYSTONE PUMA Graphic Decal-2005 This sale includes a single decal Measurements: 43" inches across in length x 17.5" inches in height Colors depicted:Multicolored Decals are made from 3 mil Premium Outdoor Air-release vinyl DESCRIPTION You are purchasing one RV trailer Keystone Puma graphic decal-2005 FEATURES 1- RV/Auto/Camper This sale includes a single decal. Measurements: 43" inches across in length x 17.5" inches in height. (Measurement is at the thickest point of the decal.) Colors depicted: Multicolored Decals can be applied to any flat non-porous surface APPLICATION Unroll and Burnish your decals Lay your Vinyl Decals on a smooth, hard surface such as a tabletop, wall, or floor. Use a squeegee (application tool) to burnish the transfer tape to the vinyl graphic by rubbing over it with a very hard pressure. Now, flip it over and repeat on the back side. This will adhere the Transfer Tape to the Vinyl Decal well so that the backing paper will remove more easily. Position and Secure Eyeball where you want to place your vinyl Decal, or use a measuring tape to determine the correct position. Use painter's tape to tack the vinyl decal in place on the top corners or center of decal. If required, use a bubble level to check that the design is level by placing it on the 1/8" trim line that surrounds your decal. Adjust as necessary. once you have your Vinyl Decal installed on your surface you will not be able to move it to another position, so take the time to double check that your design is level and EXACTLY where you want it to stay! Flip, Remove, and Roll Flip the decal up on one end (like opening a door) and carefully peel the Backing Paper off from the hinged edge. Pull the Backing Paper back slowly at a 180-degree angle, using the flat of your hand to push the vinyl down onto the Transfer Tape as you slide the Backing Paper off. Avoid touching the adhesive on the Vinyl Decal if you can. If the decal wants to come with the Backing Paper, simply roll backward a bit and push the decal back down onto the Transfer Tape using the flat edge of your fingers while you pull back. Once the Backing Paper is removed, slowly roll the Vinyl Decal down on the surface from