This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration. Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate. Working Voltage: 3.3V or 5V. Working Current: 1mA. Interface Type: Analog Output. When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums. Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino DIY Kit

Description:

Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate.

When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.

Technical Parameter:

Working Voltage: 3.3V or 5V

Working Current: <1mA

Operating Temperature Range:－10℃～＋70℃

Interface Type: Analog Signal Output

Item Size: 30mm x 23mm

GPIO:

S; signal output,

+; power supply (VCC),

-; ground (GND)

Input: Positive electrode of the piezoelectric ceramic

Gnd: Negative electrode of the piezoelectric ceramic

Features:

1. S-port is connected with the controller's analog input pin.

2. 5V and GND are respectively connected the power supply of + 5V and GND.

3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.

Package Including

10 * Ceramic Piezo Vibration Sensor