10x1-5/8 Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws - for Flatbeds, Trailers - T-30 Torx Screw Head 1 Pound 113 Screws
$27.95
by Jake Sales
Maximum Wood depth ~7/8" - Maximum Metal Thickness Screw Can Bore ~1/8" - Use T-25 Torx/Star Bit Dimensions: Head Width .38" - Total Length 1-5/8" - Shank Diameter .19" - Torx /Star Bit Not included Length of Screw Does NOT Represent the Usable Length of Thread / Thickness of Wood - See Graphic Reference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum #10 x 1-5/8" Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws
-Maximum Wood depth ~7/8" - Maximum Metal Thickness Screw Can Bore ~1/8" - Use T-25 Torx/Star Bit
-Dimensions: Head Width .38" - Total Length 1-5/8" - Shank Diameter .19" - Torx /Star Bit Not included
-Length of Screw Does NOT Represent the Usable Length of Thread / Thickness of Wood - See Graphic
-Reference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal
-Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum
-Self-Drilling Wings Bore Through Wood and Then Break Off Once They Contact the Metal
-These Bronze Coated Reamer Tek Screws are ACQ / Treated Lumber Compatible
-High Quality Treated Steel, Deep, Wide and Sharp Threads Provide Maximum Holding Power
-Corrosion Resistant, Screws Have Passed 1200 Hours of Salt Spray Testing without Coating Failures
-Countersinking Head Provides a Neat and Clean Finished Look, Holds Material in Place Securely
-Torx/Star Drive Delivers Twice the Torque of Phillips or Square Drive Screws With Less Slippage
-Deep Torx/Star Drive Head on These Tek Screws Reduce "Cam-out" When Installing Screws
-Great Tek Screw for Trailer Decks, Truck Beds, Docks, Horse and Utility Trailers and ATV Trailers
Reamer Tek Wood To Metal Screw Capabilities
The #10 x 1-5/8" Reamer Tek Wood to Metal Wood Screws use a T25 Torx/Star Bit (Not Included). Install screws at Medium speed (2,000 RPM) Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam. This Listing is for 1 Pound (113 Screws) of Reamer Tek Wood to Metal Screws with Reamer Wings
-Maximum Wood depth ~7/8" - Maximum Metal Thickness Screw Can Bore ~1/8" - Use T-25 Torx/Star Bit
-Dimensions: Head Width .38" - Total Length 1-5/8" - Shank Diameter .19" - Torx /Star Bit Not included
-Length of Screw Does NOT Represent the Usable Length of Thread / Thickness of Wood - See Graphic
-Reference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal
-Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum
-Self-Drilling Wings Bore Through Wood and Then Break Off Once They Contact the Metal
-These Bronze Coated Reamer Tek Screws are ACQ / Treated Lumber Compatible
-High Quality Treated Steel, Deep, Wide and Sharp Threads Provide Maximum Holding Power
-Corrosion Resistant, Screws Have Passed 1200 Hours of Salt Spray Testing without Coating Failures
-Countersinking Head Provides a Neat and Clean Finished Look, Holds Material in Place Securely
-Torx/Star Drive Delivers Twice the Torque of Phillips or Square Drive Screws With Less Slippage
-Deep Torx/Star Drive Head on These Tek Screws Reduce "Cam-out" When Installing Screws
-Great Tek Screw for Trailer Decks, Truck Beds, Docks, Horse and Utility Trailers and ATV Trailers
Reamer Tek Wood To Metal Screw Capabilities
The #10 x 1-5/8" Reamer Tek Wood to Metal Wood Screws use a T25 Torx/Star Bit (Not Included). Install screws at Medium speed (2,000 RPM) Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam. This Listing is for 1 Pound (113 Screws) of Reamer Tek Wood to Metal Screws with Reamer Wings