【Specifications】Remote battery disconnect switch rated current: 240A, rated voltage: 12V, standby current: 3mA, instantaneous current: 500A 【Led Voltage Display and Remote Control】Kill switch for car is equipped with LED voltage display, which can detect the battery voltage in real time.Using the remote control, you can control this kill switch within 100 metres 【Intelligent Voltage Management】If the voltage is lower than 11.8V, the remote cut-off switch will automatically cut off the power after 120 seconds to save electricity; if the voltage is higher than 13.2V, the remote control will be disabled to prevent accidental power shutdown while driving, and the power can only be controlled manually by the button on the switch 【Protect and extend battery life】The auto anti theft kill switch prevents extra power consumption of the car battery due to long term parking, ageing electronics, ageing wiring and forgetting to switch off the lights. It can maximise the storage of car battery power, effectively protect and extend the service life 【Wide Applications】Battery disconnect switch is suitable for most 12V cars, boats, RVs, trailers, trucks, ATVs, UTVs, motorbikes, and vehicles rated at less than 240A battery current; IP64 waterproof rating, can work in a wide temperature range from -20°C to 90°C, and is designed for a variety of environments

Remote control power switch pairing instructions:

1. The red clip harness connects to the positive terminal of the car battery.

2. One side of the copper terminal is connected to the wire speed removed from the negative terminal of the car battery.

3. After the positive and negative terminals are connected, manual switching can be performed.

4. After the connection is completed, you can manually press the button on the kill switch control power switch to open and close the control power switch.

LED Voltmeter Display:

Monitor your battery voltage with a clear LED display for convenience.

Remote control matching mode description:

(1)Long press the "ON" button for 1-3 seconds, see the indicator light flashing green 3 times;

(2)You can press the "ON" button on the remote control, and the indicator flashes 3 times;

(3)Then press the other button on the remote control to the "OFF" button， and the indicator blinks 3 times;

(4)The remote control can be connected.

If you do not receive the remote control signal within 30 seconds, it will automatically exit the matching state.

If the battery inside the remote control is dead, it will not be able to remote control, you can replace the battery in time.

Tips:

1. When the device is turned off and all indicators are off, press the ON button ON the device or the ON button ON the remote control to open the device. Equipment, green working indicator light, and corresponding voltage indicator light.

2. The car ignition voltage is higher, and will enter the anti-off state, the remote control does not work, and the voltage is normal after the exit anti-off state. 

When the remote control does not work:

1. When igniting in a working state, the voltage will drop to a very low level. At this time, it will enter a slate of anti-false-switch, and the anti-false-switch indicator on the right side of the same row as the working indicator will light up. In this stale, the remote control will not work, the keys on the board can be operated.

2. When the voltage rises,it will automatically withdraw from the state of error-proof shutdown, lf the voltage is always low for one minute. The buzzer will alarm, and the device will automatically shut down after two minutes.

3. If the battery inside the remote control is dead, it will not be able to remot