Made in the USA in ISO 9001:2015 Quality Certified Facility. 100% Quality and Performance Tested. Applied Membranes 25x21 RO membrane fits standard PVC and Stainless Steel RO Membrane Housings. High Performance: Produces 365 Gallons Per Day of High Quality Water at 100 psi with 99% Salt Rejection. Energy Saving: Low Pressure Operation (100 psi) for Lower Power Consumption and Reduced Operating Costs AMI Commercial RO Membrane Elements Produce High Quality Water from Tap Water in Small Commercial RO Systems Applied Membranes 2.5" x 21" Extra-Low Energy Reverse Osmosis Membrane
365 GPD @ 100 psi XLE RO Membrane (Low Pressure Membrane)

AMI Part Number: M-T2521AXLE
Membrane Size (Nominal): 2.5 x21
Membrane Dimensions: 2.5"Dia. x 21"L
Flow Rate:365 GPD (1382 LPD)
Applied Pressure: 100 psi (1 MPa)
Stabilized Salt Rejection: 99%
Outer Wrap: Tape Wrapped
Membrane Type: XLE Extra-Low Energy Tap Water
Membrane Sheet: TFC (Thin Film Composite)
Element Type: Spiral Wound
Feed Water Test Temperature: 77°F (25°C)
Single Element Recovery: 8%
Chlorine Tolerance: 0
Feed water pH Range: 2-11
End Style: Male PWT (Stinger Style)
Country of Manufacture: United States (USA)

AMI Extra-Low Energy (Low Pressure) XLE RO Membrane elements are specially designed to run at 100 psi while producing similar product flow as standard elements at higher pressures. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs.

AMI XLE Low Energy RO membrane elements produce high quality water from tap water in small commercial RO systems. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems. AMI XLE Commercial RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings. M-T2521AXLE can be used as direct replacement for many industry-standard 25x21 Size RO Elements with 3/4" male product water tubes ("stinger style") which are rated at 100 psi, including XLE-2521 and HF4-2521.

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.