Adjustable ID: Both ends of the tie rod boots can be cut according to your actual ID needs, the after cutting inner diameters are 0.39" 0.78" 1.1" 1.37" 1.25" 1.49" 1.65" 1.77". Warm note: the length of the cut product will also be shorter accordingly Product Sizes: In this kit, the tie rod boot is 8.85" long, small mouth O.D. 0.58", I.D. 0.39", large mouth O.D. 1.49", I.D. 1.30", cable ties I.D. can adjust to 1.76" max, small clamp I.D. can adjust to 2.22" max, large clamp I.D. can adjust to 4.33" max Dust Proof: The tie rod boot kit avoids wear of the rack, pinion and other steering components due to dust, sand, water from intruding into your car's steering system interior, improves the system reliability, reducing steering vibration Whole Set of Accessories: Our car rack and pinion boot kit is equipped with 2*tie rod boot, 6*cable ties, 2*adjustable small bellows locking clamps, 2* big adjustable bellows locking clamps, full set of accessories, you can install it when you get it Easy to Install: Simply remove the old kit, clean the surface of the steering rack, put the new steering rack boot on the rack, keep it completely cover the part needs to be protected, use the provided cable ties and Locking clamps to fix the both end

CAR DUSTPROOF TIE ROD BOOTS SET, THE INVISIBLE GUARD THAT GUARDS YOUR CAR



Product Attributes

Tie Rod Boot Size: 8.85 * 2.53 * 2.53 inch

Boot Small Mouth OD and ID: 0.58 inch, 0.39 inch

Boot large Mouth OD and ID: 1.49 inch, 1.30 inch

Boot Adjustable ID: 0.39" 0.78" 1.1" 1.37" 1.25" 1.49" 1.65" 1.77"

Small and Large Clamp Size: 2.07 * 1.93 * 0.31 inch, 2.69 * 2.50 * 0.31 inch

Small and Large Clamp ID: 2.22 inch Max, 4.33 inch Max

Cable Tie Size: 7.76 * 0.32 * 0.22 inch

Cable Tie ID: 1.76 inch Max

Weight: 7.93 oz

Colors: Black

Material: Silicone, Steel, Nylon

Packaging: 2 * Car Rack and Pinion Boot, 6 * Cable Ties, 2 * Large Clamps, 2 * Small Clamps



Note

Please check your car's steering rack OD is in the 0.39"-1.77" range before purchasing, and the length of the tie rod boot will also be shorter accordingly after cutting 



Product Features

Durable Materials: The tie rod boot in the kit is made of silicone material, not easy to tear. Cable tie is made of nylon material, fix the boot securely. Clamps are made of steel material, designed with engaging teeth ports for firmly sealing

Fix Securely: The clamps and cable ties can securely fix the both end of tie rod boot to the steering rack



Product Functions

Protecting the Bearings: The dust cover keeps sand and dust from getting inside the steering rack that may causing it to wear out. At the same time, play a role in damping and noise reduction



Product Installation

1. Locate the rack and pinion bellow, which is usually located underneath the steering wheel, where it connects to the steering column and steering gear

2. Using a wrench to unscrew the bolts, remove the steering wheel

3. Pulling down the dust cover. If it is stuck, try gently pushing it in one direction

4. Slide the new dust cover over the steering column, using tie wraps and clamps to secure the both end

5. Return the steering wheel to its original position and tighten the security bolts with a wrench

6. Finally, start the vehicle and test the steering system