🔹 6DBI DUAL BAND HIGH GAIN – UP TO 3X STRONGER SIGNAL Upgrade from standard 2-3dBi stock antennas to 6dBi and experience dramatically extended wireless coverage. Supports both 2.4GHz and 5GHz frequency bands—2.4GHz for longer range and better wall penetration, 5GHz for higher speed and lower latency. Perfect for streaming 4K video, online gaming, and eliminating dead zones in larger homes or offices. 🔹 RP-TNC MALE CONNECTOR – EXACT FIT FOR LINKSYS & CISCO DEVICES Features the industry-standard RP-TNC Male connector (reverse polarity TNC), which is the original antenna interface used by Linksys and Cisco for most of their wireless products. The connector features internal threads with a pinless design—ensuring a precise, secure fit. Simply unscrew your existing antennas and screw these on in their place—no adapters or tools required. 🔹 OMNIDIRECTIONAL 360° COVERAGE – NO AIMING REQUIRED Built with omnidirectional radiation pattern, these antennas capture and transmit signals from all directions simultaneously. Unlike directional antennas that require precise aiming toward the router, our omni-design works perfectly regardless of device orientation—ideal for routers, access points, and devices that may be moved or repositioned. 🔹 WIDE COMPATIBILITY – ROUTERS, ACCESS POINTS & INDUSTRIAL DEVICES Works with virtually any device equipped with RP-TNC female ports: Linksys Wireless Routers: WRT54G, WRT54GL, WRT54GS, WAP11, WAP54G, WRT160NL, E series, WRT1900AC Cisco Aironet: 340, 350, 1200, 1310, 2700, 2800, 3700 series access points Trimble Robotic Total Stations: S3, S5, S6, S7, S8, VX, TSC2, TSC3 data collectors Industrial IoT: Access points, gateways, and other RP-TNC wireless devices 🔹 FLEXIBLE TILT-AND-SWIVEL DESIGN – OPTIMIZE YOUR SIGNAL Each antenna features a 180° tilt-and-swivel hinge, allowing you to position antennas vertically, at a right angle, or any angle in-between. This flexibility helps you: Avoid metal obstructions that block RF signals Position antennas away from the router’s metal casing Optimize signal direction for better coverage in multi-story buildings 🔹 DURABLE CONSTRUCTION – BUILT TO LAST Built with premium materials and gold-plated RP-TNC connectors for corrosion resistance and optimal signal transfer. The flexible rubber housing resists bending and breakage. Operating temperature range: -20°C to +80°C. 50 Ohm impedance ensures compatibility with standard wireless equipment. ⚠️ INSTALLATION NOTE Simply unscrew your existing antennas and screw these on in their place—no drivers or software required. Hand-tighten only; do not use tools to avoid damaging the connector. For best results, position antennas vertically for maximum horizontal coverage, or angle them to avoid nearby metal obstructions. 2.4G 5G 5.8G Dual Band RP-TNC 6dBi Antenna Kit for Linksys WRT54GL WRT54G WRT54GS WAP54G WRT54G-TM Omni WiFi w/ RP-TNC connector Signal Booster for Cisco Linksys Router
Omnidirectional dipole antenna: Radiates signal with a beam of 360 degrees; also receives a signal from 360 degrees around it.

It is suitable and compliant for all the following applications:.

IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications.
2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B.
Compatible with Bluetooth devices, Wireless Access Points & other wireless devices. As Bluetooth antenna: Send or receive signal to devices in all directions (360-degree horizontal beamwidth).
As client antenna: Connect to access points in any direction. Portable size: Easily fits in a laptop case..
.
Compatible with Wireless Access Points & cards that have RP-TNC antenna jacks: Cisco/Linksys Wireless Access Points have an RP-TNC (female) jack that is compatible with this antenna..
RP-TNC Connector Characteristics and Details:

This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection ) or mount the connector on a case, panel, or Printed Circuit Board (PCB).
Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
RP-TNC is a round screw-type connector, with nickel-plated brass.

Nickel-plated brass is the best plating alloy for corrosion resistance.
RP-TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector. RP-TNC's screw-down connector performs better than BNC in the microwave spectrum.