2pcs 9W LED Bulb, Designed to replace 2U CFL PL-C 18W (Confirm acceptable length before ordering); Can Plug and play for INDUCTIVE/Magnetic ballast, But Need Remove the ELECTRONIC Ballast. Size: 2Pin G24D 158mm/6.2"*D34mm/1.4" ; 4Pin GX24Q 151mm/6.0"*D34mm/1.4"; Replace Compact Fluorescent Lamps/CFL widely used in Recessed/Surface-mounted Down lights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches. Horizontal Plug-in Lamp, 180d beam angle; Working voltage: AC 85-300V 50-60hz Aluminum Extrusion+Milky PC Cover 2pcs 9W G24 LED Bulb E-Simpo Horizontal Recessed 800-1000lm 2U CFL Retrofit PL-C 18W Equivalent 180 Degree Beam Pin Base LED Plug-in Bulb (Need Remove/Bypass The Ballast)
Specification
Input Voltage: 85-300V AC
Power: 9W LED, Can replace CFL 18W PLC Lamp
Non-Dimmable
CRI>82
Base: G24
Brightness: 9W: 800-1000Lumens;
Color Temperature: Warm White 3000-3500K; Cold White 6000-6500K
Application:
9W is used to Replace PL-C 18W 2U CFL. which are widely used in Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.
Note:
THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE,Otherwise the LED Lamp witll get flicking, burnt, smell, damaged.
How to bypass the ballast?
1. Turn Off the Power.
2. Find the Ballast. Usually it is embeded inside the ceiling fixture. Pls pull off the existing PL lamp, reflector. Leave wire in junction box. and find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side, 100V -120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4. Then, you can connect the two red wires to the black wire.
5. Next, connect the two blue wires to the white wire. now ballast is bypassed.
Specification
Input Voltage: 85-300V AC
Power: 9W LED, Can replace CFL 18W PLC Lamp
Non-Dimmable
CRI>82
Base: G24
Brightness: 9W: 800-1000Lumens;
Color Temperature: Warm White 3000-3500K; Cold White 6000-6500K
Application:
9W is used to Replace PL-C 18W 2U CFL. which are widely used in Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.
Note:
THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE,Otherwise the LED Lamp witll get flicking, burnt, smell, damaged.
How to bypass the ballast?
1. Turn Off the Power.
2. Find the Ballast. Usually it is embeded inside the ceiling fixture. Pls pull off the existing PL lamp, reflector. Leave wire in junction box. and find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side, 100V -120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4. Then, you can connect the two red wires to the black wire.
5. Next, connect the two blue wires to the white wire. now ballast is bypassed.