【Narrow PCB 3mm Width】The width of this COB light strip is only 3mm, compared with the general 8mm COB strip, 3mm is ideal for discreet lighting applications where space is limited，suitable for narrow spaces 【Uniform Light Emission】 The COB technology enables a much higher packing density of the LED array, No dark spots, Higher luminous efficacy. The COB LED light strip emits uniformly and softly, without ultraviolet rays, and is comfortable and soft 【High Brightness and CRI】High density 400LEDSs/M, 2000LED/5M COB LED strips can achieve a brightness of 3000lm, 180 degrees beam angle design for 50% wider lighting.CRI value of up to 90 or more, more true to the object colour reproduction, lighting effect is very good 【Flexible & cuttable LED strip】The COB strip is flexible, it can be bent or folded to any shape. The led tape is also cuttable (need to cut at fixed points), can make different length as you want. 【Widely application】It comes with double-sided tape, which can be attached to any dry and flat surface without screws. Suitable for indoor decoration. Such as kitchen, closet, bedroom, stairs, mirror, corridor, diy backlight, table lamp, toy light, diy lighting, special use and other lighting. 【NOTICE !!!】Can't connect the led strip directly to AC 110V power source, must add a 12V transformer. Power supply (transformer) is NOT included, need to prepare by yourself!
Parameters
Product name: MALIIGAZA 3mm COB LED Strip
LEDs quantity: 384 LEDs/m
Strip width: 0.12in (3mm)
Strip height: 0.08in(2.2mm)
Working voltage: DC 12V (CAN NOT connect to AC 110V directly!)
Color: Red
Smallest cut unit: 1.64in (50mm)
Power: 10W/meter
CRI(RA): 90+
Luminous efficacy: >100LM/W
Connector: with 2 wires on the both sides of strip
Package Included
1x 16.4FT COB LED strip (NOT including power supply)
How To Cut The COB Strip
1. Can cut the COB strip at every 1.64 inch length,there are many small cutting line on the front of the strip. Or take off the adhesive tape on the back, you can see many soldering points, can cut the strip at those points.
2. After cutting the COB strip, if you want to use the rest of the strip, you can solder wires (need soldering tool) on the back of the COB strip, or use special fast connectors.
Important Tips
1. The COB strip is connected by every 1.64FT length, so there are many soldering points on the COB strip, it's very normal, it will not influent the lighting effect.
2. The COB strip CAN NOT be connected to AC110V directly, need to add DC12V/24V transformer.
3. Please make sure the surface is clean and dry before installing the COB strip.
