✔️ 𝖤𝖥𝖥𝖤𝖢𝖳𝖨𝖵𝖤 𝖬𝖨𝖷𝖨𝖭𝖦 𝖠𝖭𝖣 𝖠𝖦𝖨𝖳𝖠𝖳𝖨𝖮𝖭– 4Spray tank mixing agitation nozzles are designed to convert high fluid input velocity into a low pressure zone that induces surrounding liquid in the tank to enter into the nozzle and recirculate, thus effectively mixing the tank contents ✔️𝖤𝖢𝖮𝖢𝖭𝖮𝖬𝖨𝖢𝖠𝖫 𝖳𝖮 𝖮𝖯𝖤𝖱𝖠𝖳𝖤 – The amount of fluid that exits the nozzle is three to five times the amount of fluid that is pumped. This multiplier effect allows greater mixing efficiency while using smaller pumping capacity in open or closed tanks ✔️ 𝖬𝖨𝖭𝖨𝖬𝖠𝖫 𝖬𝖠𝖨𝖭𝖳𝖤𝖭𝖠𝖭𝖢𝖤 & 𝖢𝖫𝖮𝖦 𝖱𝖤𝖲𝖨𝖲𝖳𝖠𝖭𝖳 – 4Spray tank mixing agitation nozzles require minimal maintenance with proven results. With no moving parts, our eductors are inherently clog resistant for reducing required maintenance and maximizing flow ✔️𝖨𝖬𝖬𝖤𝖣𝖨𝖠𝖳𝖤 𝖠𝖭𝖣 𝖢𝖮𝖭𝖳𝖨𝖭𝖴𝖮𝖴𝖲 𝖬𝖨𝖷𝖨𝖭𝖦 – Our eductor design allows the fresh feed to be supplied to the nozzle inlet rather than recycling it from the tank. This allows immediate mixing of the fresh feed with the contents of the tank, and then continuous mixing as the exit jet propagates downstream ✔️ 𝖳𝖮𝖫𝖤𝖱𝖠𝖳𝖤𝖲 𝖳𝖤𝖬𝖯𝖱𝖠𝖳𝖴𝖱𝖤 𝖴𝖯𝖳𝖮 95° 𝖢 – 4Spray’s glass reinforced polypropylene plastic tank mixing nozzles are a value-based product that allows you to mix fluids with temperatures up to 95° C without thermal breakdown 4Spray’s Eductor Tank Mixing Agitation Nozzles are designed to convert high input fluid velocity into low pressure recirculation for effective mixing and agitation. The amount of fluid that exits the nozzle is three to five times the amount of fluid pumped. Our nozzles require minimal maintenance and are inherently clog-resistant for immediate and continuous mixing at temperatures up to 95° CWhat Do Eductor Tank Mixing Agitation Nozzles Do?Tank mixing is necessary to keep contents and solutions thoroughly mixed, proper chemical/biological reactions, homogenization of products, sediment build-up prevention, proper draining/pumping, thermal stratification prevention and bacterial growth avoidance.4Spray tank mixing nozzles greatly reduce the complexity, capital cost, and maintenance requirements of any system by utilizing a pump and submerged spray nozzles, in place of conventional mechanical components, to mix immiscible liquids or solids that need to be kept suspended.Common Applications for Tank Mixing NozzlesWaste water treatment plantsOil and gas storage tanksDrinking water holding tanks and reservoirsAerobic & anaerobic digestersHomogenize tank contents when pumping/drainingSweep sludge & sediment from tank bottomsBlending ethanol and bio-dieselParticulate/solid suspensionTransport tankersChemical injection/mixingAcid/chemical storage tanksSlurry mixing/holding tanksLake/river water inletsSteam/air injectionAquarium and Aquatic usePlating tanks, Cleaning tanksPhosphating tanksE-coat tanksFertilizer tanksPulp tanksSludge tanksPaint boothsAnodizing tanksCooling towers and decorative fountains4Spray PPL tank mixing nozzles are available in sizes from 1/4 inch to 1.5 inch.