Reproduction Honda turn signal / horn switch assembly for several Honda CB's. It's installed on the left side of the handlebars. It's common for the stock switches to wear and corrode from decades of use. Sometimes the horn button breaks or the turn signal switch no longer clicks into place. This is an easy part to replace if your wires aren't running through the handlebars, if they are, it requires removing the handlebars and feeding the wires through. A horn and turn signals are great safety features to have working!
This is a high quality replica part, ready for many years of everyday use. If you are running aftermarket handlebars check to make sure the 32" wire harness is long enough. It does not have a locator pin like the original switch, but it will still clamp around the handlebar and stay in place. This means you won't have to drill a hole in aftermarket handlebars! The switch is designed so you can run the wires inside the bars or outside.
This switch assembly will fit on many of the Honda CB's, check your wiring harness and make sure the connectors will work or you can replace the bullet connectors with connectors that match your harness.
- Wire harness is 32" long
- 4 Male Bullet connectors - green, blue, grey and orange
Honda Part Number: 35250-300-033
Fits Honda:
CB175K - 1971-1973
CL175K Scrambler - 1971-1973
CB200K - 1974
CL200K Scrambler - 1974
CB350F - 1972-1974
CB350G - 1973
CB350K - 1970-1973
CL350K Scrambler - 1970-1973
CB450K - 1970-1974
CL450K Scrambler - 1970-1974
CB500K - 1971-1973
CB750K - 1969-1971