【ALL-IN-ONE SOLAR CHARGE INVERTER】Converts 48V DC to 120Vac AC and is equipped with a powerful dual-channel MPPT solar charge controller. Features an LCD display and touch buttons, with optional WiFi/GPRS remote monitoring. Single AC output. Max. PV Array Power 4500W + 4500W; Max. PV Array Open Circuit Voltage 300VDC; PV Array MPPT Voltage Range 90VDC–260VDC; Max. Solar Input Current per Channel 22A; Max. Solar Charge Current 150A (configurable); Max. AC Charge Current 120A; Max. Combined Charge Current (PV + AC) 150A. 【OPERATION WITH AND WITHOUT BATTERIES】The ANJ Series All-in-one Solar Charge Inverters support standard battery operation mode and simultaneous battery-less operation. The inverter can power the load directly from the PV array and/or the AC grid (Mains) without requiring a battery to be connected. (When no battery is connected, the minimum PV operating voltage must reach 80 Vdc). Furthermore, the inverter features a dual lithium battery activation function (enabled by default), which can be triggered by PV or AC mains to reactivate a dormant battery. 【VARIOUS OUTPUT MODES】The inverter offers several configurable AC output priority modes: Utility Priority (UTL): Switches to battery/inverter power only when the mains fails. Battery Priority (BAT): Primarily uses battery power, only switches to utility power when the battery is low. Solar Priority (SOL): Primarily uses PV energy, switches to utility power when solar energy is insufficient or the battery is low. Hybrid Mode (HBR): Allows for grid-tied or load-following (anti-backfeed) operation based on settings. 【FOUR CHARGING MODES AND COMPREHENSIVE PROTECTION FEATURES】Four battery charging modes can be configured via the inverter settings: Only Solar, Mains Priority, Solar Priority, and Hybrid Charging (CSO - default). Additionally, the inverter features numerous protection functions (Over/Under Voltage, Overload, Overtemperature, Short Circuit, Reverse Polarity, etc.) for the device, battery, and connected loads. Supports communication with the BMS of various lithium battery manufacturers. 【LCD DISPLAY AND TOUCH BUTTONS FOR REAL-TIME MONITORING】The Solar Inverter is equipped with an LCD display and touch buttons that show system data and operational status in real-time via a comprehensive interface with status icons. In case of a fault, a detailed fault code is displayed, enabling quick troubleshooting. Three LED indicators (AC OUT, CHARGE, FAULT) provide immediate visual status feedback. 【ADDITIONAL APPLICATION AREAS】This versatile all-in-one solar charge inverter is ideally suited for off-grid or backup power applications in homes, cabins, RVs, and small businesses. It can power various electrical appliances up to 6500W continuous power. Supports parallel operation of up to 6 units for higher power capacity and split-phase output (120V/240V). Rated Output Power: 6500VA/6500W (Pure Sine Wave Output)
Peak Power: 12000VA (Supports 5HP Motor Starting)
Grid Input Voltage Range: 120Vac±5% (Auto-Detects 50Hz/60Hz)
Battery Voltage: 48V DC (Operating Range: 40.0Vdc~60Vdc, Configurable Alarms for Under/Over Voltage)
Conversion Efficiency:
Grid Mode: >95%
Inverter Mode: >91%
Transfer Time (Bypass ↔ Inverter): 10ms (Seamless Transition)

Solar Charging System
Dual MPPT Trackers:
Max PV Open Circuit Voltage: 300Vdc
MPPT Operating Range: 90Vdc~260Vdc
Max PV Input: 4500W×2 (Total 9000W)/22A×2 (Dual Input)
Hybrid Charging (PV + Grid): Adjustable 0~150A
Battery Compatibility: Lead-Acid/Lithium (Max Charge Current: 120A Programmable)

Parallel Expansion
Parallel Capability: 1~6 Units (Up to 39kW Total Output)
Output Phase: 120Vac Single-Phase (Supports 120V/240V Split-Phase in Parallel Mode)

Protection & Safety
Overload Protection:
102%~110% Load: Shutdown After 5 Minutes
110%~125% Load: Shutdown After 10 Seconds
>125% Load: Shutdown After 5 Seconds
Other Protections: PV/AC Overvoltage, Battery Overcharge/Discharge, Forced Air Cooling (≤60dB Noise)

Environmental Durability
Operating Temperature: -15°C~55°C (Storage: -25°C~60°C)
Humidity Resistance: 5%~95% RH (Conformal Coating Protection)

Monitoring & Control
Local Interface: OLED Display + Touch Buttons
Remote Management: USB/RS485/WiFi/GPRS (Supports Multi-Node Monitoring)
Dimensions & Weight: 540mm×350mm×120mm (15kg)