6501KW2001A Washer Rotor Position Sensor: The 6501KW2001A rotor position sensor is responsible for sensing the position of the motor. Commonly referred to as an RPS (rotor position sensor) or MPS (motor position sensor), it monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board Efficient Solutions: QCG 6501KW2001A washer hall sensor is available in white, well-tested by the manufacturer, meets standards, and ensures long-lasting effectiveness. It offers the advantages of durability, robustness, and a long life span. If the washer pumps but will not spin or agitate, it commonly gives an "LE" (locked rotor) error. In such cases, the sensor assembly may be damaged and needs to be replaced promptly Replace Part Numbers: The 6501KW2001A washer motor rotor position sensor assembly is compatible with LG and Kenmore washers. A high-quality exact equivalent for part numbers 6501KW2001B, 6501KW2001D, PS11706506, AP5973402, 3282954, EAP11706506. The size is approximately 2.9"x2.2" (LxW) Compatibility: This washer rotor position sensor assembly (part number 6501KW2001A) is compatible with Kenmore LG washers. If you are uncertain about the compatibility of the part, please reach out to us for assistance. Compatible with LG models: F1072FD, F1141FD, F1141FD1, F1403FD9, F1403RD, F1403RD5, F1480FD, F1480RD, F1480RD5, F14A8FD, WD-10580BD, WD-10583BD, WD-1243RHD, WD-1245RHD, WD-13330TD, WD-14311RD, WD-14316RD, WD-14316RDK, WD-1474RHD, WD-3243RHD, WD-3245RHD, WD-3274RHD, WD-90282BD, WD-90286BD, WM1333HW, WM1355HR, WM1355HW, WM1377HW, WM1812CW, WM1814CW, WM1815CS, WM2010CW, WM2016CW, WM3431H, WM3431HS, etc. Compatible with Kenmore models: 796.40021900, 796.48842800, 796.48852800 Upgraded Material: The hall sensor 6501KW2001A for the L-G front load washer is made of high-quality PTFE material, known for its stability and reliability. This sensor has a sturdy design with a thick wall that minimizes susceptibility to wear and damage during regular use. Installing this sensor is simple and can help address common washer issues such as tumbling, agitation, starting problems, slow spinning, "EO" error, or "LE" (locked rotor) error display Engineered to work seamlessly with both front-load and top-load LG washing machine configurations
6501KW2001A Washer Rotor Position Sensor Assembly is responsible for sensing the position of the motor. Commonly referred to as an RPS (rotor position sensor) or MPS (motor position sensor), it monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. Easy to Install: Installation is quick and easy, saving you money, time, and energy. It only takes a few minutes to complete.
1. Start by disconnecting the electric, hot and cold water supply, and drain hose.
2. Lay the washer on its back.
3. Remove the nut from the center housing.
4. Unscrew the stator.
5. Disconnect wires using a flat screwdriver at the sensor and stator.
6. Install the new sensor.
7. Reassemble everything back together.
6501KW2001A Washer Rotor Position Sensor Assembly is responsible for sensing the position of the motor. Commonly referred to as an RPS (rotor position sensor) or MPS (motor position sensor), it monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. Easy to Install: Installation is quick and easy, saving you money, time, and energy. It only takes a few minutes to complete.
1. Start by disconnecting the electric, hot and cold water supply, and drain hose.
2. Lay the washer on its back.
3. Remove the nut from the center housing.
4. Unscrew the stator.
5. Disconnect wires using a flat screwdriver at the sensor and stator.
6. Install the new sensor.
7. Reassemble everything back together.