【Hand Held Rebar Tier Gun】Rebar Tier is a hand held machine used to pack rebars quickly. Compact size, lightweight, easy to grab. Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance. 【Main Parameters】Tying Wire Diameter: 0.8mm; Tying Wire Length: More than 110 M; Applicable Scope of Steel Strapping: 8mm - 34mm; Knot Wire Length: 300 - 500mm; Knot Number per Charge: 1500 Times; Knot the Required Time: 0.8 Seconds at a Time. 【High Performance】Sharp cutting edge more stable and durable, strapping tightness can be adjusted, suit for variety of working conditions. Easy to replace wire by a switch. 【Wide Applications】Suitable for rebar tying machine in building market: including civil building, steel bar tying, floor pipe, heating floor mesh, steel bar, etc. 【High Efficiency】Easily to handle, Completely automatic finish all the steps of steel bar rod banding work, can save 3-5 times than man power by hand. High capacity lithium battery, Working hour last 3 hours at least.

Specification

Plug Type: US Standard

Power Source: Battery Powered

Motor Type: Pure Copper Brushed Motor

Motor Voltage: 12V

Power Adapter Input: 100-240V, 50/60Hz

Power Adapter Output: 12V DC 1500mA

Battery Type: 2* 12V Lithium-ion Batteries

Battery Capacity: 4500mAh

Usage Time On a Full Charge(Each Battery): About 2H

Battery Full Charging Time: 1.5H

Required Knot Time: 0.8s Per Time

Tying Wire Length: 110m/361ft

Tying Wire Diameter: 0.8mm/0.03in

Tying Range: 8-34mm/0.31-1.34in

Knot Wire Length: ≥40cm/15.75in

Machine Size: 27.5*6.5*24cm/10.83*2.56*9.45in

Package Size: 43*34*12cm/16.93*13.39*4.72in

Gross Weight: 3.5kg/7.72 lbs

Net Weight: 2.8kg/6.17 lbs

Package Included

1* Rebar Tying Machine

1 Roll* Tying Wire (Already Installed)

1 Pair* Pliers

1* Adapter

2* Batteries

1* Toolbox

1* English Manual

Notes

1.Please note that the product only requires the installation of one battery, while the other is for replacement use.

2.When used, the machine head needs to be perpendicular to the plane of the steel bar. In the process of machine bundling, it is strictly forbidden to touch the jaws, the wire disc, or the wire by hand under any circumstances.

3.When the machine sounds an alarm, the machine must be powered off immediately, and then work after the fault is eliminated. 

4.The battery must be inserted according to the indication of the positive and negative poles. Please do not allow the battery to approach high-temperature objects, such as open flames, or directly expose the battery to damp environments, such as rainy days. It is strictly forbidden to connect the battery positively and negatively without load.

5.Please avoid collision with the product and use the specified charger to avoid product damage.