0.8s Fast Tying: The rebar tying tool has a built-in pure copper brushed motor and premium tying wire, which can tie about 1,500 knots after a full charge, and each knot can be completed in just 0.8 seconds. Meanwhile, it adopts a bipolar quasi-force structure, and the knotting can be completed without the need for connectors Long Endurance: The lithium-ion battery with a large capacity (1800mAh) can support this machine to operate for approximately 2 hours after it is fully charged, meeting your long-term bundling needs User Friendly: The one-button switch makes it easy for you to start the machine. The rebar tying machine will automatically cut the tape after tying it and prepare it in time for the next operation. If you encounter a strap stuck at the exit, you can use the pliers in the packaging to pull it out Material: Made of premium plastic and metal, this rebar tie gun is not easy to wear, rust and deform Application: The rebar tie tool is suitable for bundling steel bars and can be used in construction sites, large bridges, highways, railways, tunnels, mining construction, farms, garden fences, floor pipelines, heating floor nets

Application

It is suitable for bundling steel bars and can be widely used in construction sites, large bridges, highways, railways, tunnels, mining construction, farms, garden fences, floor pipelines, heating floor nets, etc.

Specification

• Color: Orange
• Material: Plastic, Steel
• Plug Type: US Standard
• Power Source: Battery Powered
• Motor Type: Pure Copper Brushed Motor
• Motor Voltage: 12V
• Power Adapter Input: 100-240V, 50/60Hz
• Power Adapter Output: 12V DC 1500mA
• Battery Type: 2* 12V Lithium-ion Batteries
• Battery Capacity: 1800mAh
• Usage Time On a Full Charge(Each Battery): About 2H
• Battery Full Charging Time: 1.5H
• Required Knot Time: 0.8s Per Time
• Tying Wire Length: 110m/361ft
• Tying Wire Diameter: 0.8mm/0.03in
• Tying Range: 8-34mm/0.31-1.34in
• Knot Wire Length: ≥40cm/15.75in  
• Machine Size: 27.5*6.5*24cm/10.83*2.56*9.45in
• Net Weight: 2.8kg/6.17 lbs

Package

• 1* Rebar Tying Machine     
• 1 Roll* Tying Wire (Already Installed)
• 1 Pair* Pliers
• 1* Adapter
• 2* Batteries
• 1* Toolbox
• 1* English Manual

Notes

• 1.Please note that the product only requires the installation of one battery, while the other is for replacement use.
• 2.When used, the machine head needs to be perpendicular to the plane of the steel bar. In the process of machine bundling, it is strictly forbidden to touch the jaws, the wire disc, or the wire by hand under any circumstances.
• 3.When the machine sounds an alarm, the machine must be powered off immediately, and then work after the fault is eliminated. 
• 4.The battery must be inserted according to the indication of the positive and negative poles. 
• 5.Please avoid collision with the product and use the specified charger to avoid product damage. When inspecting or repairing the product, you must first turn off the power of the machine and unplug the battery. It is strictly forbidden for non-professionals to disassemble this product.