Both sides can be printed, and one hot bed can provide two material usage experiences. PEO has patterns, making it more innovative PEI is Durable and scratch resistant . The adhesion of PEO surface is better than that of PET. Compatible with Flsun V400 3D Printer Build Plate Round Dia 309mm Textured PEI / New Smooth PEO Magnetic Spring Steel Flex Bed PEO PEI Sheet
1.When printing PLA , the bottom (first layer) is relatively smooth, and when it is above 60 , the adhesive strength is strong; When the temperature is below 60 , the adhesive strength is weak, and the printed piece easily falls off and cannot be printed.
2.When printing PETG, the bottom (first layer) is relatively smooth, and when it is above 60 , it has a certain degree of stickiness and is easy to peel off; When the temperature is above 65 , the viscosity is strong; When the temperature is below 60 , the adhesive strength is weak, and the printed piece easily falls off and cannot be printed.
Suggested printing temperature: PLA 60 PETG 70
Advantage:
1. Both sides can be printed, and one hot bed can provide two material usage experiences.
2. PEO has patterns, making it more innovative
3. PEI is Durable and scratch resistant .
4.The adhesion of PEO surface is better than that of PET.
Product Usage:
1. Place it on a magnetic sticker and magnetically absorb the steel plate
2. Suggested printing Filament for PEO surface: PLA/PETG. The adhesion of ABS is not as strong, but compared to PET surface, ABS has better adhesion.
3. It is recommended to print filament such as PLA/PETG on the PEI surface. If printing ABS, it is recommended to seal the box and print.
1.When printing PLA , the bottom (first layer) is relatively smooth, and when it is above 60 , the adhesive strength is strong; When the temperature is below 60 , the adhesive strength is weak, and the printed piece easily falls off and cannot be printed.
2.When printing PETG, the bottom (first layer) is relatively smooth, and when it is above 60 , it has a certain degree of stickiness and is easy to peel off; When the temperature is above 65 , the viscosity is strong; When the temperature is below 60 , the adhesive strength is weak, and the printed piece easily falls off and cannot be printed.
Suggested printing temperature: PLA 60 PETG 70
Advantage:
1. Both sides can be printed, and one hot bed can provide two material usage experiences.
2. PEO has patterns, making it more innovative
3. PEI is Durable and scratch resistant .
4.The adhesion of PEO surface is better than that of PET.
Product Usage:
1. Place it on a magnetic sticker and magnetically absorb the steel plate
2. Suggested printing Filament for PEO surface: PLA/PETG. The adhesion of ABS is not as strong, but compared to PET surface, ABS has better adhesion.
3. It is recommended to print filament such as PLA/PETG on the PEI surface. If printing ABS, it is recommended to seal the box and print.