【QUALITY】 - Manufactured in ISO/TS16949 2009 certified facilities, each throttle valve is rigorously tested to meet Original Equipment (OE) requirements.AUQDD electronic throttle bodies meet or exceed the performance of the original equipment they replace. 【Performance】 - Professional micro control chip inside to enables it to precisely open and close to regulate the fuel/air mixture,and help to keep the engine from idling instability.Upgraded sensors provide a sensitive engine control,effectively improve engine power as well as the vehicle acceleration performance. 【OE Fit】 - Order with confidence. Each throttle body is thoroughly tested to make sure 100% OE fit ,ensure quality and reliability out of the box. 【Cost-effective】 - We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Electronic Fuel Injection Throttle Body Assembly. 【Please Note】 - Before placing the order,please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,view compatability tab including the notes.Any problem please free to contact us and you will get a satisfactory solution About us
Inc. is well-known as a leader in providing quality auto parts to the aftermarket.
Innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every AUQDD part.
At AUQDD, we take pride in the quality of our products and in your satisfaction.Look forward to becoming your first choice brand of Throttle Bodies.
Product Fitment Information:
Compatible With
2004-2004 Dodge Durango [For 5.7L V8]
2003-2004 Dodge Ram 1500 [For 5.7L V8]
2003-2004 Dodge Ram 2500 [For 5.7L V8]
2003-2004 Dodge Ram 3500 [For 5.7L V8]
Package Includes:
1 x Electronic Throttle Body Assembly - TB1159 (12-Month Warranty)
Part Specifications
Connector:6 Pin Male
Inside Diameter:3-1/8 In. (80 mm)
Complete Throttle Body Assembly Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)
Throttle Body Installation Notes
After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.
This is because the newly installed throttle body parameters are inconsistent with the original.
Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.
When the computer cannot match, you can use the following manual method to match
1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute
The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1～2 days of self-learning.
Inc. is well-known as a leader in providing quality auto parts to the aftermarket.
Innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every AUQDD part.
At AUQDD, we take pride in the quality of our products and in your satisfaction.Look forward to becoming your first choice brand of Throttle Bodies.
Product Fitment Information:
Compatible With
2004-2004 Dodge Durango [For 5.7L V8]
2003-2004 Dodge Ram 1500 [For 5.7L V8]
2003-2004 Dodge Ram 2500 [For 5.7L V8]
2003-2004 Dodge Ram 3500 [For 5.7L V8]
Package Includes:
1 x Electronic Throttle Body Assembly - TB1159 (12-Month Warranty)
Part Specifications
Connector:6 Pin Male
Inside Diameter:3-1/8 In. (80 mm)
Complete Throttle Body Assembly Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)
Throttle Body Installation Notes
After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.
This is because the newly installed throttle body parameters are inconsistent with the original.
Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.
When the computer cannot match, you can use the following manual method to match
1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute
The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1～2 days of self-learning.