Adam's Polishes Rinse Aid 16oz - Enhances Gloss, Slickness, Color - Use With Foam Gun or Foam Cannon - Ceramic Coating Silica Infused Complete Vehicle
$18.69
by Adam's Polishes
✅ SPRAY ON, RINSE OFF PROTECTION - Effortlessly seal and protect your vehicle with this versatile solution designed for quick and effective exterior surface protection. Just spray on and rinse off to enjoy long-lasting results. ✅ ENHANCED GLOSS & HYDROPHOBICITY - Amplify the slickness, gloss, and hydrophobic behavior of your vehicle's surface. Its silica-based formula ensures a superior shine and water-beading effect that lasts. ✅ VERSATILE APPLICATION - Whether you prefer using a foam cannon with a pressure washer or a foam gun with a hose, Adam’s Rinse Aid is compatible with both. Enjoy convenience and flexibility in your car detailing routine. ✅ STAND ALONE OR WITH OTHER PRODUCTS - Adam’s Rinse Aid can be used as a standalone protectant or applied over your favorite wax, sealant, or ceramic coating spray. Customize your level of protection without compromising on performance. ✅ 110% SATISFACTION GUARANTEE! Proudly crafted in the USA, this state of the art rinse aid protectant is specially formulated using the most advanced technologies available. We pride ourselves on customer service and satisfaction and believe that this is THE BEST Ceramic Coating Rinse Aid on the market! If you don’t agree, we’ll do everything we can to make it right. Instructions for General Use:
1. Following washing the vehicle and while it is still wet, add 2-3 fl oz of Adam’s Rinse Aid to Foam Cannon/Gun Reservoir and dilute to volume with fresh water.
2. Spray or hose Adam’s Rinse Aid solution over entire vehicle including paint, glass, wheels and plastics – this solution can be applied to all exterior surfaces safely and effectively. However, do not let the solution dry on the surface or residues could manifest.
3. Once all surfaces are sufficiently coated, disconnect Foam Cannon/Gun and switch to fresh water and rinse all excess material off the surface thoroughly or proceed immediately into drying.
4. Either towel dry or use forced air to finish drying the vehicle completely.
Quick Detailer / Drying Aid:
1. Adam’s Rinse Aid can also be diluted to make an effective quick detailer and/or drying aid solution by diluting the concentrate with fresh water at 1:9 (1 part concentrate with 9 parts water for a total of 10 parts).
2. Following washing the vehicle and while it is still wet, mist the Quick Detailer solution onto all exterior surfaces working a few panels at a time.
3. Using pressurized water, spray off the excess solution thoroughly and note the instantaneous hydrophobic behavior on the surface.
4. Either towel dry or use forced air to finish drying the vehicle completely.
Common Sense Warning:
Adam’s Rinse Aid is a concentrated solution and requires dilution prior to use. It is designed to be used in conjunction with a foam cannon and a pressure washer or a foam gun and a garden hose, unless diluted using the Quick Detailer / Drying Aid instructions.
1. Following washing the vehicle and while it is still wet, add 2-3 fl oz of Adam’s Rinse Aid to Foam Cannon/Gun Reservoir and dilute to volume with fresh water.
2. Spray or hose Adam’s Rinse Aid solution over entire vehicle including paint, glass, wheels and plastics – this solution can be applied to all exterior surfaces safely and effectively. However, do not let the solution dry on the surface or residues could manifest.
3. Once all surfaces are sufficiently coated, disconnect Foam Cannon/Gun and switch to fresh water and rinse all excess material off the surface thoroughly or proceed immediately into drying.
4. Either towel dry or use forced air to finish drying the vehicle completely.
Quick Detailer / Drying Aid:
1. Adam’s Rinse Aid can also be diluted to make an effective quick detailer and/or drying aid solution by diluting the concentrate with fresh water at 1:9 (1 part concentrate with 9 parts water for a total of 10 parts).
2. Following washing the vehicle and while it is still wet, mist the Quick Detailer solution onto all exterior surfaces working a few panels at a time.
3. Using pressurized water, spray off the excess solution thoroughly and note the instantaneous hydrophobic behavior on the surface.
4. Either towel dry or use forced air to finish drying the vehicle completely.
Common Sense Warning:
Adam’s Rinse Aid is a concentrated solution and requires dilution prior to use. It is designed to be used in conjunction with a foam cannon and a pressure washer or a foam gun and a garden hose, unless diluted using the Quick Detailer / Drying Aid instructions.