【Adjustable Height】 Hydraulic Salon Chairs This is a 4-bolt pattern pump, which has an adjustable height range of 11cm/ 4.3". You can install it on the chair to adjust it to the right height for your needs, which is very practical. 【Good Material】Barber Equipment The pump body is made of cast iron and the pump has a plastic casing with painting technology, you do not have to worry about it will be deformed in transit and it has a longer service life. 【Easy to Use】Portable Barber Chairs You only need to step on the lever to make the pump rise or fall. It is very labor-saving and does not need you to adjust it manually. 【High Load-bearing Capacity】 Beauty Salon Chair It can withstand 440 pounds of weight, so you don't have to worry that it will break easily because of the weight-bearing problem. 【Easy to Install】Black Salon Chair You just need to install the lever and the plastic cover, then install the entire lift pump on the chair that you want to lift.

Description

This barber chair hydraulic pump has an adjustable height range of 11 cm/4.3in, you can easily complete the lift of the chair according to your needs. And it has a strong load-bearing capacity, you do not have to worry that it will easily break down. If you need chair lifting and weight-bearing, then it is very suitable for you!

Details

Lever: This item has an ergonomically designed lever that has a suitable position. You can easily adjust the height of the lift pump without bending over.

 

Strong Housing: The painted housing can make this lift pump not easy to rust, hardness is strong, and you can use a long time.

 

Application

This barber chair hydraulic pump is suitable as a replacement part for most standard styling chairs in bars, restaurants, hairdressers and other places.

 

How to Confirm Whether It Matches Your Seat Needs to Pay attention to the Following Four Aspects.

1. Upper interface requirements: Top thread of spindle: m8.

2. Shaft Diameter: 26mm.

3. Cone Ratio of shaft: 1:13.

4. Requirements for base connection: 4 holes and the diagonal spacing of holes is 115mm. And please bring four M6 nuts.

 

To confirm whether it is compatible with your seat, please pay attention to the following four aspects:

1. Connection port on the top: The main shaft top thread requirement is M8.

2. Main shaft diameter: 26 mm.

3. Main shaft taper ratio: 1:13.

4. Connection to the chassis: The chassis requires four holes with a diagonal hole spacing of 115 mm, and M6 nuts must be provided separately.

Specification

Model: YL700

Name: Barber Chair Hydraulic Pump

Pump Body Material: Cast Iron

Pump Casing Material: Plastic

Surface Treatment: Painting

Color: Silver

Weighr Capacity: 200kg/440 pounds

Thread: M8Height: 38cm / 15.0inHeight After Stretching: 49cm / 19.3inAdjustable Height: 11cm / 4.3in

Connecting Shaft Diameter: 2.6cm/ 1.02in

Hole Distance Between the Pump and the Base: 11.5cm/ 4.53in

 

Package Included

1* Barber Chair Hydraulic Pump

 

Notes

1. The package does not contain the bottom disc and chair, so if you need it, please prepare it in advance.

2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.