【Capacitor Decoders】led headlight bulb decoders are capacitor decoders which transmit by pulse signal, much better than resistance decoder, it is environmental and engery saving; USA shipment ！ 【Powerful Functions】Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting; FIX LED Headlight Lamp Out Message:Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC; 【Unsuitable Type of Vehicles】2008 335i e92 coupe, 2008 X5, 5 series F10, 2010 535xi, 2010 E60, 2011 550i, 2015 335i, E90 Pre-LCI, Camry, Fusion, Q7, 2004 E320 fog lights, 2008 E350 4matic, 2018 Transit/Transit van, 2012 Camry SE., 08 SAAB 9-3, 19 Santa FE , 2009 cayenne s, 2017 Macan, 2004 XC90, 2006 S60, 2010 XC70, Passat 2009, compass etc. If can't decode successfully after purchase, please tell us for solutions! 【Easy Installation】All-in-One Design. Plug and Play Setup for LED bulbs. Average Installation time: 10-15 minutes; 【Kindly Note】As cars and decode are complex, we can not 100% sure if this JM version decoder fits for your car, for help before orders, please provide us your car model and year, car problems, the problem led bulb power(per set) and position(high or low beam, fog lights, DRL lights or other positons), we will make recommendation exactly for you, thank you! Specifications:
1. Model: H1 H3 H4 H7 H8 H9 H11 H10 9005 9006 HB3 HB4 9004 9007 H13 D1S D2S D3S D4S
2. Votage: DC12-24V
3. 2pcs/set
When will you need a decoder?
While you install led headlights into your car and meet the problems like the situation below, you may need a decoder.
(1) While you turn on the light after installation, the bulb keep flashing.
(2) Computer shows error of headlights.
(3) The bulb still keep lighting for a while although you have turned off the light.
(4) Lighting is every dimmed, not bright as normally.
Functions:
1. Fit to Germany cars which need electronic decoding.
There is a CANBus electronic inspect for the light while you turn on the engine of Germany cars, so it needs electronic decoding. And our decoder can offer this electronic decoding function. For some Germany cars, the system will also check the working power of the headlights bulbs after you turn it on. In this situation, you still need to add a resistor on the headlight bulbs to satisfy the demand of power.
2. Fit to pulse power supplied cars.
Pulse power supplied capacitance is a technology to reduce the heat value of halogen bulbs, make the lifespan be longer, and save more power on working. But led headlights need constant current supplied, not pulse power supplied this kind of intermittent power supply. So while you install the led headlights into the car with pulse power supplied device, the led headlight bulbs will keep flashing or flash and then lights off. In this situation, decoder will be a large capacitance and store up the electric on it and keep supply to the led headlights bulb current constantly. (If meet pulse power supplied problem, you can ask 4S store to revise your car into constant current supply too.)
3. A small electronic component for Toyota cars
There is a high beam signal light on Toyota cars, which will be turned on by a electronic component of in our decod
1. Model: H1 H3 H4 H7 H8 H9 H11 H10 9005 9006 HB3 HB4 9004 9007 H13 D1S D2S D3S D4S
2. Votage: DC12-24V
3. 2pcs/set
When will you need a decoder?
While you install led headlights into your car and meet the problems like the situation below, you may need a decoder.
(1) While you turn on the light after installation, the bulb keep flashing.
(2) Computer shows error of headlights.
(3) The bulb still keep lighting for a while although you have turned off the light.
(4) Lighting is every dimmed, not bright as normally.
Functions:
1. Fit to Germany cars which need electronic decoding.
There is a CANBus electronic inspect for the light while you turn on the engine of Germany cars, so it needs electronic decoding. And our decoder can offer this electronic decoding function. For some Germany cars, the system will also check the working power of the headlights bulbs after you turn it on. In this situation, you still need to add a resistor on the headlight bulbs to satisfy the demand of power.
2. Fit to pulse power supplied cars.
Pulse power supplied capacitance is a technology to reduce the heat value of halogen bulbs, make the lifespan be longer, and save more power on working. But led headlights need constant current supplied, not pulse power supplied this kind of intermittent power supply. So while you install the led headlights into the car with pulse power supplied device, the led headlight bulbs will keep flashing or flash and then lights off. In this situation, decoder will be a large capacitance and store up the electric on it and keep supply to the led headlights bulb current constantly. (If meet pulse power supplied problem, you can ask 4S store to revise your car into constant current supply too.)
3. A small electronic component for Toyota cars
There is a high beam signal light on Toyota cars, which will be turned on by a electronic component of in our decod