An All-day Vision IMX477: Built-in a motorized IR-CUT Filter, switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night). High Quality Imaging: Keep the high image quality of 1/2.3″ 12.3 Megapixel IMX477 sensor, max. still resolution 4056(H) x 3040(V). Field of View: 65° (H) Less Hassle: No more wasting time looking for the CS lens and camera case. A 1/2.3″ 6mm focal length CS lens is included; Hole Pitch: Compatible with 29mm, 30mm, 34mm, compatible with standard industrial camera enclosure. Applications: Automatic Switching IR-CUT filter and high resolution make it perform better in monitoring Octoprint 3D Printer, Day & night vision security camera system, motion detection, wildlife photography and other machine vision projects. NOTE: 1. It compatible with Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Pi 3/3B+/4) 2. This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards. This Arducam module uses the same 12MP IMX477 image sensor as the RPi High Quality Camera, but offers a mechanical IR cut-off filter switched automatically based on light condition. The official RPi HQ camera is not sensitive to infrared, and there won’t be a NoIR version. On the contrary, this Arducam camera module not only offers sensitivity to infrared but also keeps the natural feeling during daylight. It’s fully compatible with Jetson Board with a camera connector.

SPECIFICATION

Camera

- Sensor: IMX477

- Optical Format: 1/2.3″ (diagonal 7.857mm)

- Resolution: 4056(H) x 3040(V) 12.3MP

- Pixel Size: 1.55um x 1.55um

- IR Sensitivity: Switchable IR-CUT filter

- Interface: 4-lane MIPI CSI-2

- Lens Mount: CS-Mount

- Frame Rate: (depends on the target platform, maximum fps limit might apply)
Full resolution@60fps(normal), 4K2K@60fps, 1080p@240fps
Full resolution@40fps (12bit normal)
Full resolution@30fps (DOL-HDR, 2 frames)

Lens

- Format: 1/2.3 inch

- Focal Length: 6mm

- Aperture (F): Max. F1.2

- Field of View (FOV): 65° (H)

- Mount: CS-Mount

- Back Focal Length: 7.53mm

- MOD: 0.2m

- Dimension: Φ30×31mm

- Weight: 53g

Camera board

- Board Size: 38mm×38mm

- Hole Pitch: Compatible with 29mm, 30mm, 34mm

KERNEL CAMERA DRIVER USED

This camera relies on kernel drivers to work – one kernel version, one camera driver.

- Versions earlier than JetPack 4.3 (L4T 32.3.1) are not supported.
- Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver.
- Future JetPack/kernel updates require future drivers. When that happens, please allow us some time to process and if you don’t see it released in time, kindly remind US.