Multi-mode: display adjustable (button)

1. peak down

2. peak up

3. center to sides with no peaks

4. no peak inward on both sides

5. no peaks

6.1-5 Alternating 24 second effects

Voltage DC voltage DC6-16v

Current: 20 mA (standby)

Connection Preamplifier or Speaker Positive

LED 32-segment audio indicator Adjustable sensitivity

Total size: 117X29MM

Display size: 82X10MM

Color: Green+Yellow+Red

Note: When you need two channels to flash together, you need to twist the yellow and white wires together and connect them to the speaker +. If you need two channels flashing at the same time, you need to connect the yellow wire to the speaker + of one channel (crossover) and the white wire to the speaker + of the other channel (crossover).

Audio signal wiring priority to connect to the front level (the front level is the signal output from the computer or cell phone), can also be connected to the amplifier speaker wire (the connection between the amplifier output and the speakers) IN Audio Signal Inputs (the signal is recommended to be connected to the front level (front of the amplifier volume), and after the back level (the output side), you have to consider the treble, mid-range, and bass. The effect of the three tones is different. The left and right channels are different. For example, you cannot see the sound of a bass instrument when connected to the treble (Status, the voice of the character cannot be displayed when connected to the bass).