Ultralight 75mm Drone: Experience a new level of lightweight flying with our 1S 75mm indoor whoop. Weighing in at just 21g, equipped with Air canopy, Air75 brushless whoop frame, 5IN1 Air brushless flight controller, 0802SE 23000KV motor and GF 40mm 2-blade props, ultra-lightweight feature Update 5IN1 Air Brushless FC: The first 1S brushless FC that uses the G473 processor which has superior computing power, and is equipped with ICM42688P gyroscope, this all-in-one solution seamlessly integrates FC, ESC, OSD, RX and Onboard 5.8 25~400 VTX, weighing only 3.6g RX Suitable: Please note that the Air75 brushless whoop drone comes with the default protocol is ELRS, and the firmware version is V3, you need to choose the same protocol and the same firmware so that can work together. If the situation of RX loss that you met, please re-bind the drone to the goggles, and try to use the drone again Propulsion Systems: For a smooth and elegant free flight experience, the Air75 features the Gemfan 40mm 2-Blade Props, a larger pitch tip of the props, quick response, and crisp action, and 0802SE
23000KV Motor, allowing for timely responses and precise follow-up actions for incredible speed bursts and agile steering C03 Camera&Canapy: Experience high-quality images with the lightweight C03 FPV Micro Camera(1.45g). Redesigned Air Canopy for flexibility, impact resistance. Enhanced bending reduces breakage, improves explosion resistance. Supports Micro/Nano analog cameras, angle adjustable (25°-50°). With it, Air75 can chase the limit of racing victory worry less Package: You will receive 1 * Air75 Brushless Whoop Quadcopter, 1 * Air Canopy, 4 * Gemfan 40mm 2-Blade Propellers, 1 * Pack of Screws, 1 * 4Pin Adapter Cable, 1 * USB Type-C Adapter Board Trouble Shooting
VTX: Higher VTX power consumes more energy and generates more heat, reducing flight time. It is recommended that pilots use 25~100 for daily indoor flight to obtain better flight time.
RX loss: This issue may occur on the drone that lost the bind with the remote controller, please try to bind with the controller again refer to the user manual.
OSD: If there has any problems about the OSD, please follow the step below to troubleshoot the issue:
1. Checking the cable of the camera whether is loose;
2. Re-bind the drone with the goggles;
3. Checing the camera whether is broken
How to bind with the drone with the TX module:
1. Plug and unplug the flight controller three times
2. Make sure the RX LED is doing a quick double blink, which indicates the receiver is in bind mode
3. Make sure the RF TX module or radio transmitter enters binding status, which sends out a binding pulse
4. If the receiver has a solid light, it's bound
About the Package
You will receive 1 * Air75 Brushless Whoop Quadcopter, 1 * Air Canopy, 4 * Gemfan 40mm 2-Blade Propellers, 1 * Pack of Screws, 1 * 4Pin Adapter Cable, 1 * USB Type-C Adapter Board.
Specification
Item: Air75 Brushless Whoop Quadcopter
Weight: 21g
Wheelbase: 75mm
Frame: Air75
Canopy: Air Canopy
FC & ESC: Air Brushless Flight Controller(5IN1 Version)
VTX: Onboard 5.8 25-400 VTX
Camera: C03 Camera
Motor: 0802SE
23000KV
Props: Gemfan 40mm 2-Blade Props
Battery Connector: BT2.0 U Cable Pigtail
Recommend Battery: LAVA 1S 450mAh 75C (Excluded in quad)
Flight Time(4.35v-3.3v): 6.5min
RX: Seriall ELRS 2.4G
Package
1 * Air75 Brushless Whoop Quadcopter
1 * Air Canopy
4 * Gemfan 40mm 2-Blade Propellers
1 * 4Pin Adapter Cable
1 * USB Type-C Adapter Board
1 * Pack of Screws
23000KV Motor, allowing for timely responses and precise follow-up actions for incredible speed bursts and agile steering C03 Camera&Canapy: Experience high-quality images with the lightweight C03 FPV Micro Camera(1.45g). Redesigned Air Canopy for flexibility, impact resistance. Enhanced bending reduces breakage, improves explosion resistance. Supports Micro/Nano analog cameras, angle adjustable (25°-50°). With it, Air75 can chase the limit of racing victory worry less Package: You will receive 1 * Air75 Brushless Whoop Quadcopter, 1 * Air Canopy, 4 * Gemfan 40mm 2-Blade Propellers, 1 * Pack of Screws, 1 * 4Pin Adapter Cable, 1 * USB Type-C Adapter Board Trouble Shooting
VTX: Higher VTX power consumes more energy and generates more heat, reducing flight time. It is recommended that pilots use 25~100 for daily indoor flight to obtain better flight time.
RX loss: This issue may occur on the drone that lost the bind with the remote controller, please try to bind with the controller again refer to the user manual.
OSD: If there has any problems about the OSD, please follow the step below to troubleshoot the issue:
1. Checking the cable of the camera whether is loose;
2. Re-bind the drone with the goggles;
3. Checing the camera whether is broken
How to bind with the drone with the TX module:
1. Plug and unplug the flight controller three times
2. Make sure the RX LED is doing a quick double blink, which indicates the receiver is in bind mode
3. Make sure the RF TX module or radio transmitter enters binding status, which sends out a binding pulse
4. If the receiver has a solid light, it's bound
About the Package
You will receive 1 * Air75 Brushless Whoop Quadcopter, 1 * Air Canopy, 4 * Gemfan 40mm 2-Blade Propellers, 1 * Pack of Screws, 1 * 4Pin Adapter Cable, 1 * USB Type-C Adapter Board.
Specification
Item: Air75 Brushless Whoop Quadcopter
Weight: 21g
Wheelbase: 75mm
Frame: Air75
Canopy: Air Canopy
FC & ESC: Air Brushless Flight Controller(5IN1 Version)
VTX: Onboard 5.8 25-400 VTX
Camera: C03 Camera
Motor: 0802SE
23000KV
Props: Gemfan 40mm 2-Blade Props
Battery Connector: BT2.0 U Cable Pigtail
Recommend Battery: LAVA 1S 450mAh 75C (Excluded in quad)
Flight Time(4.35v-3.3v): 6.5min
RX: Seriall ELRS 2.4G
Package
1 * Air75 Brushless Whoop Quadcopter
1 * Air Canopy
4 * Gemfan 40mm 2-Blade Propellers
1 * 4Pin Adapter Cable
1 * USB Type-C Adapter Board
1 * Pack of Screws