【Notice】Please note that the Cetus FPV Kit is comes with the remote controller which have the default protocol of the Frsky D8, and it also support to switch the protocol to Frsky D8, Futaba S-FHSS, and Frsky LBT D16 mode via radio transmitter. Please switch the protocol same as the drone you want to bind with this remote control so that both of them can work successful. For how to switch the protocol, please refer to the user manual or the picture on the detailed page 【VR02 FPV Goggles】Cetus Lite FPV Kit includes VR02 FPV goggles and the quadcopter has a built-in VTX and camera, allowing users to fly quadcopter with a First-person view and have an immersive flying experience. Users also can check the quadcopter flying status from the OSD information shown on the goggles. If there has any problems about the signal, please re-install the camera and re-bind with the goggles 【Altitude Hold, Emergency Auto Locking】Altitude hold keeps the drone hovering at a certain height, combining with the LiteRadio 1 that has two centering gimbals, new beginners can easily control the height of the quadcopter. Integrated with a 6-axis IMU (Inertial Measurement Unit) sensor, which enables the quadcopter to ensure flight safeness. The Cetus Lite quadcopter will automatically disarm the motors when a collision is detected. Guarantees pilots' and property safeness 【Effective Protection Frame Design】Safety is important, especially as a gift. The Cetus Lite features a propeller guard design, protecting from users getting hurt. The frame is made of PA12, a high-quality and durable material, allowing it to stay strong and detached even during flight crashes. Users can fly it confidently and has no concern about crashing. This reliable design ensures safe indoor and outdoor flying 【FPV Simulator Supported】You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time Please Kindly Note
1. The Cetus Lite FPV Kit comes with the LiteRadio 1 Radio Transmitter, the default protocol of this remote controller is Frsky D16 (FCC & LBT) protocol, this protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers.
2. Please play this kit in a wide and interference environment, if there has any issue with the signal, please re-install the camera and re-bind the drone with the goggles.

Specification
Height Positioning: Barometer
Accuracy of Auto-hover: vertical ±0.3m (under no wind environment)
Receiver Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25mW
Camera Tilt Degree: 25°
Camera: Cetus Lite Camera
Goggles: VR02 FPV Goggles
Transmitter: LiteRadio 1 Radio Transmitter
Motor: 716-19000KV Brushed motor
Propeller: 31mm 4-blade 0.8mm shaft hole
Takeoff Weight: 36g(with battery)
Size: 90*85*45mm
Power System: 1S
Battery: BT2.0 300mAh 1S Battery (external)
Flight Time: 4-5 mins
Flight Distance: 80m (in a wide & interference-free environment)

Package
1 * Cetus Lite FPV Brushed Whoop Quadcopter
1 * LiteRadio 1 Transmitter (CC2500 Version)
1 * BETAFPV VR02 FPV Goggles
2 * BT2.0 300mAh 1S Lipo Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter (Adapter board and 4-pin connector cable)
1 * Prop Removal Tool
4 * 31mm 4-Blade Prop (Spare parts)
1 * 716 CW Motor
1 * 716 CCW Motor
1 * Goggles Headband