BLAJR Car Decals are rearview mirrors 15*2.4CM(2 PCS) covering 120*15CM(1 PCS)220*11.5CM(2 PCS) on both sides of the body, made from premium PVC material, this premium vinyl sticker does not crack, fade and flake. And it's waterproof, making the sticker more durable. 【 Cool Decor 】BLAJR Stripe stickers can be placed on the hood of your car, the sides of your door, the rearview mirror, or anywhere else you want to modify your car. It will make your car look cooler, more different, more linear, more aesthetically pleasing. [Easy installation] There is an adhesive on the back, just peel and paste. There should be no residue in the disassembly process. For better results, please do not apply when the car is hot, do not wax when washing the car. After pasting the sticker 72 do not wash the car, do not go on the highway, 72 hours after the car wash will not fall off. [Precautions] Bubbles appear in the transfer film due to winding packaging. But the stickers are good and have no effect on your stickiness or effect. Once the sticker is in place, the transfer film can be removed. INSTALLATION & ATTENTION INSTALL TIPS 1.Clean the parts of the body need to be stick. 2.Chose the sticking position. Put the back of the decal facing up, tear off the non-sticker on the surface, spray some water on the car body and glue to be pasted ( reduce the viscosity, easy adjustment) 3. Lift one side of the sticker and scrape it slowly from the other side with a card,(Same operation as apply mobile phone film) Scrape the bubbles and adjust the position of the sticker, 4.The extra stickers at the door and the seam can be cut off with a knife.(Use a needle to solve the bubbles that can't be scraped off) 5.After 2 hours, the label is completely dry, remove the transfer film. ATTENTION -Do not use sticker when the car is hot. - Do not wax the car 7days before using the sticker. The wax will make the sticker not sticky. -In the process of pasting, do not pull the sticker forcefully to prevent it from being elongated and deformed.