VERSATILE WORKHOLDING CLAMP KIT: The Low Profile CNC clamps from BOW Products comes with everything you need to hold any work piece to your CNC machine. The kit includes 2 clamps, 4 interchangeable clamp tips, and all the hardware you need. STRONG AND SECURE HOLD: This clamp kit can be used to hold down work pieces of all shapes and sizes. The clamps create a downward pressure for a strong hold while enabling unobstructed access to work the surfaces and the edges at the same time. CLAMP IN ANY POSITION: The clamps can be positioned 360 degrees in any direction and have 4 inches of linear positioning range. The clamp tips travel down a 15 degree slope over .45 inches horizontally and .12 inches vertically. This creates a downward force for more secure clamping of even the most unique work pieces. Bow Products Low Profile CNC clamps are the perfect addition to every woodworkers workholding tool bin. The Kit includes two clamps, 4 differenct clamp tips, and all the hardware you need to adapt the clamps to your needs. The clamps provide super strong side clamping that holds the workpiece firmly in place and holds from the side allowing you to work surfaces and edges on materials down to ¼” in height. This clamp stays out of your way. Low Profile Clamps enable edge work while holding the workpiece secure. Our unique design enables flexibility in placement on any surface with 360° positioning and 4” of positioning range once the clamp is set in place. Features four interchangeable Tips that enable positioning on virtually and position on the workpiece including corners, rounds, flat or odd shapes. Exclusive non marring EVA tips for delicate materials, corners, and are reversable or replaceable if damaged. When the clamp is secure, Tips travel down a 15° slope over .45” horizontally and .12” vertically allowing you to calibrate the clamping pressure you desire. Hardware enables clamping on CNCs with T-Track, Flat wood substrate or even spoil board of varying depths. You can even add your own 1/4" inch thread T-Bolts if you need additional depth. Bow Products Low Profile CNC clamps are just one more example of Bow Innovation designed by woodworkers for woodworkers.