Touch lamp desk light 3 Way Sensor Switch Repair.the colour coding of the touch switch wires, which are: BLACK (neutral), RED (live), WHITE (switch) and YELLOW (lamp base) 3 levels: low, medium, high, then off.NOTE:The light bulb can only be installed with ordinary light bulbs, so there will be three levels of adjustment ① Connect the red wire to the fire wire. ②. The black wire is connected to the neutral wire, which is a shared neutral wire (both the output and input neutral wires are connected). ③. Connect the white wire to the live wire of the light bulb. ④ Connect the yellow wire to the metal part of the lamp, and control the on and off by touching the metal [Notes]: 1. First of all, consider whether the wiring is correct; 2. The power of the bulb cannot exceed 60W; 3. After the touch device is installed, there can be no dimming on the power cord, and cannot be used at the same time; 4. The yellow wire is connected The lamp body must be a conductor, such as metal, if it is loaded on plastic or wood, it cannot be used; 5.3 can not install energy-saving lamps and LED bulbs, only ordinary bulbs can be installed. [Special reminder]: Because the energy-saving lamps are not dimmable, the three-speed touch sensor is only suitable for ordinary light bulbs (within 60W), not suitable for energy-saving lamps and LED lamps.
① Connect the red wire to the fire wire.
②. The black wire is connected to the neutral wire, which is a shared neutral wire (both the output and input neutral wires are connected).
③. Connect the white wire to the live wire of the light bulb.
④ Connect the yellow wire to the metal part of the lamp, and control the on and off by touching the metalNote: The color of the item may vary slightly due to photography and your own computer
Touch lamp desk light 3 Way Sensor Switch Repair
AC: 120V/240V; 50Hz/60Hz
3 levels: low, medium, high, then off
Dimension: 4.8 x 3.2 x 1cm
Weight: 10g
Special Note: the energy saving lamps is not dimmable, and 3 Way Sensor Switch only applies to ordinary light bulbs (60W or less), not suited for energy-saving lamps and LED lights, pls make sure this point before purchase.
Notes:
If the Sensor lamp Switch can not work well,pls try the following steps:
1. Whether you have connected the wire correct?
2. The power of lamp/bulb can not exceed 60W.
3. after installing the touch device, dimming or opening lamp can not be allowed on power cord.
4. The yellow line must be connect with conductor, such as metal,can not connect with plastic or wood.
5. The 3-way switch only suitable for ordinary light bulbs ,not suitable for LED bulb or energy-saving lamps
Package include:
1Pcs 3 Way Sensor Switch
① Connect the red wire to the fire wire.
②. The black wire is connected to the neutral wire, which is a shared neutral wire (both the output and input neutral wires are connected).
③. Connect the white wire to the live wire of the light bulb.
④ Connect the yellow wire to the metal part of the lamp, and control the on and off by touching the metalNote: The color of the item may vary slightly due to photography and your own computer
Touch lamp desk light 3 Way Sensor Switch Repair
AC: 120V/240V; 50Hz/60Hz
3 levels: low, medium, high, then off
Dimension: 4.8 x 3.2 x 1cm
Weight: 10g
Special Note: the energy saving lamps is not dimmable, and 3 Way Sensor Switch only applies to ordinary light bulbs (60W or less), not suited for energy-saving lamps and LED lights, pls make sure this point before purchase.
Notes:
If the Sensor lamp Switch can not work well,pls try the following steps:
1. Whether you have connected the wire correct?
2. The power of lamp/bulb can not exceed 60W.
3. after installing the touch device, dimming or opening lamp can not be allowed on power cord.
4. The yellow line must be connect with conductor, such as metal,can not connect with plastic or wood.
5. The 3-way switch only suitable for ordinary light bulbs ,not suitable for LED bulb or energy-saving lamps
Package include:
1Pcs 3 Way Sensor Switch