BREVELTION 220V Jaw Crusher Ore Coke Coal Stone Crusher Laboratory Small Crusher Rock Crusher 4KW 500-3000KG/H
$2648.20
by BREVELTION
【APPLICATION】Jaw crusher is mainly used for crushing various medium-hard rocks or ores, and is an important equipment in-laboratories and laboratories of metallurgy, geology, building materials, chemical industry and other industries. It can also be used in small-scale ore crushing production. 【PARAMETER】Voltage:220V;Power:4kw;Feeding Inlet Size:110*150mm;Feeding size:≤120mm;Output size:3-25mm;Rotating Speed:680 rpm;Capacity:500-3000kg/h 【ENLARGED FEED INLET】High manganese steel jaw plate Strong wear resistance and long service life,good crushing effect and improved crushing efficiency 【DURABLE】The discharge particle size can be adjusted as needed.Good cutting performance,anti-penetration, wear-resistant and durable 【HIGH EFFICIENCY】Sufficient power, low noise, strong ability to withstand overload Installation & Attention
1.The installation foundation of the machine body must be firm and flat to prevent the machine body from being broken due to uneven stress.
2.Before commissioning, check whether the fastening screws are tightened and whether the pulley is flexible to be turned by hand. If any abnormality is found, the commissioning can only be carried out after troubleshooting.
3.Before the test run, the no-load test run must be carried out. During the idle test, turn the small hand wheel to check whether the regulating mechanism is flexible. It can only be used if there is no abnormality after half an hour of no-load.
4.The hardness of the broken material should not exceed the medium hardness to avoid accelerating the damage of the parts and reducing the service life.
5.For the convenience of discharging, the installation height of the whole machine can be properly raised during installation.
Note:This machine has no plug and needs to be connected to the air switch for use by the customer.
Item Number:021541
1.The installation foundation of the machine body must be firm and flat to prevent the machine body from being broken due to uneven stress.
2.Before commissioning, check whether the fastening screws are tightened and whether the pulley is flexible to be turned by hand. If any abnormality is found, the commissioning can only be carried out after troubleshooting.
3.Before the test run, the no-load test run must be carried out. During the idle test, turn the small hand wheel to check whether the regulating mechanism is flexible. It can only be used if there is no abnormality after half an hour of no-load.
4.The hardness of the broken material should not exceed the medium hardness to avoid accelerating the damage of the parts and reducing the service life.
5.For the convenience of discharging, the installation height of the whole machine can be properly raised during installation.
Note:This machine has no plug and needs to be connected to the air switch for use by the customer.
Item Number:021541