Packing: 4inch 3 Step 1 2 3 Diamond Polishing Pads - 3Set SIZE: Diameter 99*4.5thickness Polishing the material. Concrete, granite, marble, glass, stone, tile, stone, glass, ceramics, hard plastic, fiberglass, etc. The cotton on the backer is hooked by a Velcro, which is soft and can be bent at any angle. Only wet grinding, not dry grinding, otherwise the service life will be greatly reduced. Polishing instructions:
Polishing needs to be cooled by adding water, which will cause less damage to the stone, higher polishing gloss, soft and beautiful, no dust pollution. The water mill can be bent appropriately!
:01When operating the wet grinding disc, it needs to be used with the sticky plate installation machine!
:02 Water needs to be added when the wet polishing pad is polished!
The color of the back of the wet polishing pad will be different in different steps, which is easy to identify
1. Choose a suitable small and thicker grinding disc to start working, and end at the large and thinner
Yes, in order to achieve a good polishing effect, it is recommended not to skip the number.
Ú. Roughly it is not the smoothness of the ground, correctly judge the starting number of grinding,
On rough ground, start grinding with a coarser particle size first, otherwise it will take more time to achieve the desired effect.
Û. If you find that it takes a lot of time to grind away the scratches, you have to change to a coarser grinding disc, which will save you a lot of time.
It adopts a long nylon back velvet design, which has strong adhesion and firm adhesion. It can be peeled repeatedly and is not easily damaged. The product mesh number is printed on the back for easy identification during use.
It can be bent at any angle during use, and it is inclined to the special-shaped arc of the table surface. It has no dead ends and high efficiency!
Adopting the seam design, the sheet body is softer, the heat dissipation is fast, and the noise is low; the strengthened design of the connecting body of each sheet can effectively prevent the edges from falling off and increase the service life.
Polishing needs to be cooled by adding water, which will cause less damage to the stone, higher polishing gloss, soft and beautiful, no dust pollution. The water mill can be bent appropriately!
:01When operating the wet grinding disc, it needs to be used with the sticky plate installation machine!
:02 Water needs to be added when the wet polishing pad is polished!
The color of the back of the wet polishing pad will be different in different steps, which is easy to identify
1. Choose a suitable small and thicker grinding disc to start working, and end at the large and thinner
Yes, in order to achieve a good polishing effect, it is recommended not to skip the number.
Ú. Roughly it is not the smoothness of the ground, correctly judge the starting number of grinding,
On rough ground, start grinding with a coarser particle size first, otherwise it will take more time to achieve the desired effect.
Û. If you find that it takes a lot of time to grind away the scratches, you have to change to a coarser grinding disc, which will save you a lot of time.
It adopts a long nylon back velvet design, which has strong adhesion and firm adhesion. It can be peeled repeatedly and is not easily damaged. The product mesh number is printed on the back for easy identification during use.
It can be bent at any angle during use, and it is inclined to the special-shaped arc of the table surface. It has no dead ends and high efficiency!
Adopting the seam design, the sheet body is softer, the heat dissipation is fast, and the noise is low; the strengthened design of the connecting body of each sheet can effectively prevent the edges from falling off and increase the service life.