【9A AC-3 / 25A AC-1 Rated Load Switching】This 3-pole magnetic contactor is rated for motor loads (AC-3 duty) at 9A, 24V DC and resistive loads (AC-1 duty) at 25A, 24V DC. For safe operation, motor circuits require protection by 9A time-delay fuses, while resistive load circuits require 20A time-delay fuses 【24V DC Coil with 1NO+1NC Auxiliary Contact】Operates with a 24V DC 50/60Hz coil voltage. Includes 1NO + 1NC auxiliary contact block for use in control circuit interlocking, status signaling, or self-latching circuits 【660V Insulation and 6kV Impulse Withstand Voltage】Constructed with insulation rated for 690V and an impulse withstand voltage (Uimp) of 6kV. This design provides protection against voltage spikes in electrical systems 【DIN Rail Mounting with Screw Terminals】Designed for installation on standard DIN rails for organization within control panels. Screw terminal type accepts 18-10 AWG copper wires only for electrical connections 【UL Certified and CE Marked】This contactor is UL Certified and CE marked, confirming compliance with specific safety standards for use in North America and international markets 3-Pole DC Magnetic Contactor for Industrial Control
The Magnetic DC Contactor is a UL-Certified 3-pole magnetic contactor for use in control of motors and resistive loads in industrial automation, control panels, and machinery. This component is engineered to electrical standards for 24V DC applications.
Specifications:

Conventional Heating Current (Ith):

AC-3 (Motor Loads): 9A 24V DC

AC-1 (Resistive Loads): 25A 24V DC

Coil Voltage: 24V DC, 50/60Hz

Main Contacts: 3 Poles, Normally Open (3NO)

Auxiliary Contact: 1 Normally Open (NO) + 1 Normally Closed (NC)

Rated Insulation Voltage (Ui): 690V

Rated Impulse Withstand Voltage (Uimp): 6kV

Mounting: Standard 35mm DIN Rail

Terminal Type: Screw

Wire Size: 18-10 AWG Copper Wire Only

Safety Certifications: UL Certified, CE Marked

Application:

Control of three-phase motors

Industrial machinery and pump control

HVAC system compressors and fans

Power distribution and lighting control systems

Automated equipment and control panels

Installation Note:
This product is a component for use in electrical installations. It must be installed, wired, and protected by a qualified electrician in accordance with all applicable local and national electrical codes (NEC). Proper short-circuit protection (e.g., fuses or circuit breakers) must be provided based on the load type and current rating.