【40A AC-3 / 60A AC-1 Rated Load Switching】This 3-pole magnetic contactor is rated for motor loads (AC-3 duty) at 40A, 110V AC and resistive loads (AC-1 duty) at 60A, 110V AC. For safe operation, motor circuits require protection by 40A time-delay fuses, while resistive load circuits require 70A time-delay fuses 【110V AC Coil with 2NO+2NC Auxiliary Contact】Operates with a 110V AC 50/60Hz coil voltage. Includes 2NO + 2NC auxiliary contact block for use in control circuit interlocking, status signaling, or self-latching circuits 【660V Insulation and 6kV Impulse Withstand Voltage】Constructed with insulation rated for 690V and an impulse withstand voltage (Uimp) of 6kV. This design provides protection against voltage spikes in electrical systems 【DIN Rail Mounting with Screw Terminals】Designed for installation on standard DIN rails for organization within control panels. Screw terminal type accepts 8-6 AWG copper wires only for electrical connections 【UL Certified and CE Marked】This contactor is UL Certified and CE marked, confirming compliance with specific safety standards for use in North America and international markets 3-Pole Magnetic Contactor for Industrial Control
The Magnetic Contactor is a UL-Certified 3-pole magnetic contactor for use in control of motors and resistive loads in industrial automation, control panels, and machinery. This component is engineered to electrical standards for 110V AC applications.
Specifications:

Conventional Heating Current (Ith):

AC-3 (Motor Loads): 40A 110V AC

AC-1 (Resistive Loads): 60A 110V AC

Coil Voltage: 110V AC, 50/60Hz

Max. Continuous Current: 60Amp

Main Contacts: 3 Poles, Normally Open (3NO)

Auxiliary Contact: 2 Normally Open (NO) + 2 Normally Closed (NC)

Rated Insulation Voltage (Ui): 690V

Rated Impulse Withstand Voltage (Uimp): 6kV

Mounting: Standard 35mm DIN Rail

Terminal Type: Screw

Wire Size: 8-6 AWG Copper Wire Only

Safety Certifications: UL Certified, CE Marked

Application:

Control of three-phase motors

Industrial machinery and pump control

HVAC system compressors and fans

Power distribution and lighting control systems

Automated equipment and control panels

Installation Note:
This product is a component for use in electrical installations. It must be installed, wired, and protected by a qualified electrician in accordance with all applicable local and national electrical codes (NEC). Proper short-circuit protection (e.g., fuses or circuit breakers) must be provided based on the load type and current rating.