Battery Active Equalizer, Cell Battery Equalizer, Active Balance Equalizer Balancer Board Li Ion Cell Balancer for LiFePO4, Power Converters (2s)
$8.98
by Marhynchus
Excellent Performance: Built in MOS with ultra low internal as well as 0?1.2A balance current and balance voltage accuracy within 30mv. Application: The cell equalizer is widely used on Li ion NCM and for LiFePO4, the static power consumption is less than 20uA, and Smart Testing: The automatic testing and starting, with light indicator for better display. Battery Active Equalizer Function: The battery active equalizer can test voltage difference between adjacent batterstrings and transmit to low volt to achieve voltage balance. Package List: 1 x Battery Active Equalizer, 1 x Cable How to Use:
1. When the balance indicator light is on, the balance work is on.
2. The balance indicator light is off, and the balance circuit is dormant.
3. The balance indicator light is flashing, it's power failure or circuit failure.
Specification:
Item Type: Battery Active Equalizer
Applicable Battery: Li ion NCM, LFP.
Single Cell Voltage: 3.0-4.2V
Recommended Battery Capacity: Below 30AH
Voltage Balance Accuracy: 30mV between adjacent voltages, typical.
Equalization Method: It is detected that the voltage difference between adjacent batteries is greater than 0.1V to the equalization, and the voltage difference between adjacent batteries is less than 0.03V to stop working.
Balance Current: 0.1V voltage difference and 0.5A balance current, when the voltage difference is 0.2V, the maximum balance current is 1.2A.
Under voltage sleep voltage: The adjacent voltage difference is less than 0.03V and enter the sleep state.
Quiescent Operating Current: 0.01mA
Package List:
1 x Battery Active Equalizer
1 x Cable
Note:
1. It is not recommended to be compatible with low strings, the indicator light will flash and report an error. Be sure to check that each cell is properly wired and insulated before connecting the balancing board. Otherwise it will short circuit and burn the board.
2. If the battery is connected, it must be used with the board. The and discharge voltage difference the balance board to work to achieve energy transfer balance.
1. When the balance indicator light is on, the balance work is on.
2. The balance indicator light is off, and the balance circuit is dormant.
3. The balance indicator light is flashing, it's power failure or circuit failure.
Specification:
Item Type: Battery Active Equalizer
Applicable Battery: Li ion NCM, LFP.
Single Cell Voltage: 3.0-4.2V
Recommended Battery Capacity: Below 30AH
Voltage Balance Accuracy: 30mV between adjacent voltages, typical.
Equalization Method: It is detected that the voltage difference between adjacent batteries is greater than 0.1V to the equalization, and the voltage difference between adjacent batteries is less than 0.03V to stop working.
Balance Current: 0.1V voltage difference and 0.5A balance current, when the voltage difference is 0.2V, the maximum balance current is 1.2A.
Under voltage sleep voltage: The adjacent voltage difference is less than 0.03V and enter the sleep state.
Quiescent Operating Current: 0.01mA
Package List:
1 x Battery Active Equalizer
1 x Cable
Note:
1. It is not recommended to be compatible with low strings, the indicator light will flash and report an error. Be sure to check that each cell is properly wired and insulated before connecting the balancing board. Otherwise it will short circuit and burn the board.
2. If the battery is connected, it must be used with the board. The and discharge voltage difference the balance board to work to achieve energy transfer balance.