𝐑𝐄𝐀𝐃 𝐁𝐄𝐅𝐎𝐑𝐄 𝐏𝐔𝐑𝐂𝐇𝐀𝐒𝐈𝐍𝐆: The blade fit for 𝐁𝐋2️⃣0️⃣1️⃣2️⃣, 𝐁𝐋2️⃣0️⃣1️⃣3️⃣, 𝐁𝐋4️⃣8️⃣0️⃣, 𝐁𝐋4️⃣8️⃣0️⃣𝐃, 𝐁𝐋4️⃣8️⃣1️⃣, 𝐁𝐋4️⃣8️⃣2️⃣, 𝐁𝐋4️⃣8️⃣6️⃣𝐂𝐎, 𝐁𝐋4️⃣8️⃣7️⃣, 𝐁𝐋4️⃣8️⃣7️⃣𝐀, 𝐁𝐋4️⃣8️⃣8️⃣𝐖, 𝐁𝐋4️⃣9️⃣0️⃣, 𝐁𝐋4️⃣9️⃣1️⃣, 𝐁𝐋4️⃣9️⃣2️⃣ 𝐋𝐎𝐎𝐊 𝐎𝐕𝐄𝐑 𝐇𝐄𝐑𝐄!! The item fits for 𝐁𝐋4️⃣9️⃣2️⃣𝐖, 𝐁𝐋6️⃣4️⃣0️⃣, 𝐁𝐋6️⃣4️⃣1️⃣, 𝐁𝐋6️⃣4️⃣2️⃣, 𝐁𝐋6️⃣4️⃣2️⃣𝐖, 𝐁𝐋6️⃣4️⃣2️⃣𝐙, 𝐁𝐋6️⃣8️⃣0️⃣, 𝐁𝐋6️⃣8️⃣0️⃣𝐀, 𝐁𝐋6️⃣8️⃣2️⃣, 𝐂𝐓6️⃣4️⃣0️⃣𝐂, 𝐂𝐓6️⃣4️⃣1️⃣, 𝐂𝐓6️⃣8️⃣0️⃣, 𝐂𝐓6️⃣8️⃣0️⃣𝐀, 𝐂𝐓6️⃣8️⃣0️⃣𝐒𝐒. 𝐂𝐇𝐄𝐂𝐊 𝐇𝐄𝐑𝐄!! The Pro Extractor Blade Assembly fit for 𝐂𝐓6️⃣8️⃣0️⃣𝐖, 𝐂𝐓6️⃣8️⃣2️⃣𝐒𝐏, 𝐍𝐍1️⃣0️⃣0️⃣𝐀, 𝐍𝐍𝐍𝐍1️⃣0️⃣0️⃣, 𝐍𝐍1️⃣0️⃣1️⃣, 𝐍𝐍1️⃣0️⃣2️⃣, 𝐍𝐍2️⃣1️⃣0️⃣. Make sure you have checked the compatibility first. 𝐌𝐄𝐀𝐒𝐔𝐑𝐄 𝐓𝐇𝐄 𝐃𝐈𝐌𝐄𝐍𝐒𝐈𝐎𝐍𝐒: Please make sure that the diameter of the blade is 3.9inches and the height is 3.15inches. It contains 7 fins and will only work with 18oz, 24oz and 32oz cups. Important Tips: Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you're going to use this replacement gasket.

Blender replacement parts for Nutri Ninja Blender is a perfect mold without leaking, easy installation, unique design high quality environmentally friendly product.

Product Specifications:

Amount of Fins: 7 Fins

Blade Material: Food Grade Plastic and Stainless Steel

Diameter: 4 in / 10CM

Package Included:

1 x Blender Replacement Blade

1 x Gasket Rubber

Fit blenders models for Nutri Ninja Blender:

(1) For Nutri Ninja Pro Blecder BL450-30/BL456-30/BL451-30/BL454-30.

(2) For Nutri Ninja Auto-iQ Blender BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682.

(3) For Nutri Ninja Auto-iQ Pro Blender BL487-30/BL488W-30/BL487A-30/BL486CO-30.

(4) For Nutri Ninja Auto-iQ Blender Compact System BL491-30/BL492-30/BL492W-30.

Not fit for BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.

2. Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten itv.

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage.

4. Do not overfill! To avoid spilling, do not add ingredients past the "Max" fill line.

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal.

6. Please make sure it in right place and locked tightly.

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender.