Blue Charm Fake Car Alarm, 2 Year Continuous Usage Battery Life, Red Blinking LED Light with Pre-Wired Battery Holder, (2xAA Batteries not Included)
$12.95
by Blue Charm Beacons
2 YEAR BATTERY LIFE in continuous 24 hour usage (Don't get fooled by the purposely misleading "daily usage" claims of other products in this category; that's their tricky way of saying that you need to turn their product on and off every day and only allow it to blink for a few hours each day.) Powered by 2 AA batteries (not included) Bright red blinking LED light scares away thieves No buggy solar/USB features to go wrong. Ours is simple, reliable, and effective. Convenient ON/OFF switch NOTE: The wire connection to the PCB is fragile. Handle with care when installing. This item is a bright blinking (red) LED wired to a 2 AA battery holder with a convenient ON/OFF switch. The LED bulb is clear for maximum brightness and blinks red color.
The expected battery life of 2 AA batteries (not included) in CONTINUOUS 24 HOUR USE is 2 full years. (Don't get fooled by the purposely misleading "daily usage" claims of other products.)
This item is simple and reliable; no USB recharging, buggy sensors, etc.
Can be used in a wide variety of applications:
* As a fake alarm device in a car, boat, motorcycle, etc. This can help to protect your property from potential thieves, causing them to move on to easier targets.
* As a faux alarm outside a front door, in the eves of a house, or positioned inside a garage window. Anywhere that you want to give the bad guys second thoughts about breaking in.
* In a hobby project such as a train set, model display, 3D box diorama, etc.
* Many different applications limited only by your imagination!
Installation: Just drill a 5mm hole in your target panel location then place circuit board behind the panel with LED light poking through 5mm hole you drilled.
Blinking rate of the LED is about 1 flash per second. Studies show that this rate is ideal for attracting the eye without being annoying. This flash rate also mimics speed of expensive alarm systems' LED flashing rate.
Specifications:
* Contents: 1 red blinking LED attached to circuit board 1" x 1.5" (25mm x 38mm)
* 5mm diameter clear lens LED flashes bright red. The LED is 9mm tall measuring from surface of circuit board.
* Requires 2 AA batteries; batteries not included.
* Battery holder box size is 2-5/8" x 1-5/16" x 11/16" (68mm x 34mm x 18mm). The on/off switch protrudes 1/8" from the battery box.
* The wires from the box to the circuit board are approximately 5-1/2 inches long.
NOTE: The wire connection to the PCB is fragile. Handle with care when installing.
The expected battery life of 2 AA batteries (not included) in CONTINUOUS 24 HOUR USE is 2 full years. (Don't get fooled by the purposely misleading "daily usage" claims of other products.)
This item is simple and reliable; no USB recharging, buggy sensors, etc.
Can be used in a wide variety of applications:
* As a fake alarm device in a car, boat, motorcycle, etc. This can help to protect your property from potential thieves, causing them to move on to easier targets.
* As a faux alarm outside a front door, in the eves of a house, or positioned inside a garage window. Anywhere that you want to give the bad guys second thoughts about breaking in.
* In a hobby project such as a train set, model display, 3D box diorama, etc.
* Many different applications limited only by your imagination!
Installation: Just drill a 5mm hole in your target panel location then place circuit board behind the panel with LED light poking through 5mm hole you drilled.
Blinking rate of the LED is about 1 flash per second. Studies show that this rate is ideal for attracting the eye without being annoying. This flash rate also mimics speed of expensive alarm systems' LED flashing rate.
Specifications:
* Contents: 1 red blinking LED attached to circuit board 1" x 1.5" (25mm x 38mm)
* 5mm diameter clear lens LED flashes bright red. The LED is 9mm tall measuring from surface of circuit board.
* Requires 2 AA batteries; batteries not included.
* Battery holder box size is 2-5/8" x 1-5/16" x 11/16" (68mm x 34mm x 18mm). The on/off switch protrudes 1/8" from the battery box.
* The wires from the box to the circuit board are approximately 5-1/2 inches long.
NOTE: The wire connection to the PCB is fragile. Handle with care when installing.