Piston Seal x2
Piston Dust Seal x2
Pin Boot A x2
Pin Boot B x1
Bleeder Cap x1 Fits Honda: CB400T Hawk - 1981 - Front
CM400C Custom - 1981 - Front
CB450SC Nighthawk - 1986 - Front
CMX450C Rebel - 1986-1987 - Front
CX500C Custom - 1982 - Front
CX500TC Turbo - 1982 - Front/Rear
FT500 Ascot - 1982-1983 - Front
GB500 Tourist Trophy - 1989-1990 - Front
GL500 Silver Wing - 1981-1982 - Front
GL500I Silver Wing Interstate - 1981-1982 - Front
VF500F Interceptor - 1984-1986 - Front/Rear
CB650SC Nighthawk - 1983-1985 - Front
CX650T Turbo - 1983 - Rear
GL650 Silver Wing - 1983 - Front
GL650I Silver Wing Interstate - 1983 - Front
VF700C Magna - 1984-1986 - Front
VF700C Magna - 1987 - Front
VF700S Sabre - 1984-1985 - Front Fits Honda: CB750F Super Sport - 1981-1982 - Front
CB750K Four - 1982 (to frame CM30151) - Front
CB750SC Nighthawk - 1982-1983 - Front
VF750C V45 Magna - 1982-1983 - Front
VF750C V45 Magna - 1988 - Front
VT800C Shadow - 1988 - Front
CB900C Custom - 1982 - Front/Rear
CB900F Super Sport - 1981-1982 - Front
CB1000C Custom - 1983 - Front/Rear
CBX Super Sport - 1981-1982 - Front
GL1100 Gold Wing - 1982 - Front/Rear
GL1100A Gold Wing Aspencade - 1982 - Front
GL1100I Gold Wing Interstate - 1982 - Front/Rear
VF1100C V65 Magna - 1983-1986 - Rear
VF1100S V65 Sabre - 1984-1985 - Rear
VT1100C Shadow - 1985-1990 - Front
VT1100C Shadow - 1992-1993 - Front
Reproduction front or rear brake caliper rebuild kit for the Honda models listed.
Stock calipers have a tendency to become corroded and the piston can seize inside the caliper. If you're rebuilding your front caliper it might be time for a fresh rebuild kit, especially if the original piston is pitted. Ride safe and brake with confidence!
NOTE: Check VIN # range for your model listed below, brake calipers changed from year to year.
Kit Includes:
Piston x2: 45107-MA3-006 - Diameter 30mm / Height 35mm
Piston Seal x2
Piston Dust Seal x2
Pin Boot A x2
Pin Boot B x1
Bleeder Cap x1
Installation Tips:
Make sure to thoroughly clean the channel in the caliper that holds the seal, if there is any built up grease or dirt it will not allow the seal to sit properly which will affect the pistons ability to engage and retract.
The darker side of the piston with the indented ridge faces the brake pad.
Use brake grease between the piston and the pad but do not allow any grease or brake fluid to come in contact with brake pads. (this kit does not come with pads)
Fits Honda:
CB400T Hawk - 1981 - Front (1 set needed)
CM400C Custom - 1981 - Front (1 set needed)
CB450SC Nighthawk - 1986 - Front (1 set needed)
CMX450C Rebel - 1986-1987 - Front (1 set needed)
CX500C Custom - 1982 - Front (1 set needed)
CX500TC Turbo - 1982 - Front (2 sets needed) - Rear (1 set needed)
FT500 Ascot - 1982-1983 - Front (1 set needed)
GB500 Tourist Trophy - 1989-1990 - Front (1 set needed)
GL500 Silver Wing - 1981-1982 - Front (1 set needed)
GL500I Silver Wing Interstate - 1981-1982 - Front (2 sets needed)
VF500F Interceptor - 1984-1986 - Front (2 sets needed) - Rear (1 set needed)
CB650SC Nighthawk - 1983-1985 - Front (2 sets needed)
CX650T Turbo - 1983 - Rear (1 set needed)
GL650 Silver Wing - 1983 - Front (2 sets needed)
GL650I Silver Wing Interstate - 1983 - Front (2 sets needed)
VF700C Magna - 1984-1986 - Front (2 sets needed)
VF700C Magna - 1987 - Front (1 set needed)
VF700S Sabre - 1984-1985 - Front (2 sets needed)
CB750F Super Sport - 1981-1982 - Front (2 sets needed)
CB750K Four - 1982 (to frame CM30151) - Front (1 set needed)
CB750SC Nighthawk - 1982-1983 - Front (2 sets needed)
VF750C V45 Magna - 1982-1983 - Front (2 sets needed)
VF750C V45 Magna - 1988 - Front (1 set needed)
VT800C Shadow - 1988 - Front (1 set needed)
CB900C Custom - 1982 - Front (2 sets needed) - Rear (1 set needed)
CB900F Super Sport - 1981-1982 - Front (2 sets needed)
CB1000C Custom - 1983 - Front (2 sets needed) - Rear (1 set needed)
CBX Super Sport - 1981-1982 - Front (2 sets needed)
GL1100 Gold Wing - 1982 - Front (2 sets needed) - Rear (1 set needed)
GL1100A Gold Wing Aspencade - 1982 - Front (2 sets needed)
GL1100I Gold Wing Interstate - 1982 - Front (2 sets needed) - Rear (1 set needed)
VF1100C V65 Magna - 1983-1986 - Rear (1 set needed)
VF1100S V65 Sabre - 1984-1985 - Rear (1 set needed)
VT1100C Shadow - 1985-1990 - Front (2 sets needed)
VT1100C Shadow - 1992-1993 - Front (1 set needed)