【Edger Blade Replacement】243801-02 edger blade replaces part number#: 243801-00, 243801-02, 40-519, 243797-00, EB-007AL. Product specification: Length 7-3/4", Center Hole 1/2", Width 2-3/4", Thickness 0.1" 【Compatibility】The 2 pack trimmer blades are compatible with the following models: ① EH1000 Type 5 12 AMP Lawn Edger, EH1000 (Type 6) Edgehog Lawn Edger; ② LE710, LE750 and LE760 EDGE HOG 2-in-1 Landscape Edger; ③ Also compatible with Craftsman model: CMEED400. 【Clean Edging】The replacement edger blades are composed of hardened steel, which provides long-lasting and constant cutting effectiveness. They are designed with sharpened serrated edges for clean, quick cuts between grass and paved areas. 【Easy to Replace】A screwdriver or wrench will be needed to replace this part. Remove the nut and washer to replace the old blade with new one, and reconnect the external hardware. 【Warm Reminder】Matching may differ slightly based on a specific machine kind. If the center hole of the edger replacement blade is slightly small, please use a file to bore/grind the hole to allow it to fit.

Replaces part numbers: 243801-00, 243801-02, 40-519, 243797-00, EB-007AL. 

Compatible with the following

✔ EH1000 Type 5 12 AMP Lawn Edger, EH1000 (Type 6) Edgehog Lawn Edger

✔ LE710, LE750 and LE760 EDGE HOG 2-in-1 Landscape Edger; 

✔ Also compatible with Craftsman model: CMEED400

Please consult owners manual for proper part number identification and proper installation

Product Specification:

Length: 7-3/4"   Center Hole: 1/2"   Width: 2-3/4"   Thickness: 0.1"

Color: Black

Material: Metal

Includes: 2 x Edger Blades

Features

Sturdy Material

Made of hardened steel, sturdy and longer service life.

Serrated Design

Factory-sharpened serrated edges make edging effortless and smooth.

Clean Cutting Lines

This metal blade is perfect for edging along the curbs and driveways and helps to define precise boundaries between the lawn and paved areas. 

Easy Installation

Tools needed: A screwdriver or adjustable wrench

1. Use an adjustable wrench to loosen and remove the nut and washer.

2. Remove the worn blade and install the new replacement edger blade.

3. Place the washer on the spindle and then tighten up the nut.

Warm Reminder: Matching may vary slightly depending on certain machine types. If the central hole of the blade is somewhat too small, please use a file to bore/grind the hole to allow it to fit.