Including: 1pc encoder, 1pc bracket, 1pc HB961 Indicator,1pc 300mm perimeter wheel and screws Power supply 5-26V, Push pull output, 600PPR min measuring unit:1mm The output waveform is proportional to the unit of international measurement type(Meter or inch) Widely used in length or distance measurement
Description
Suitable for measuring the length or speed of target moving successively by wheel type,such as textile measuring ,printing measuring, Plastic Machinery etc . Power supply: 5-26V Shaft diameter: 8mm Wheel perimeter :200mm Encoder Body diameter: 38mm Cable length: 1 meter Pulse: 200P/R Output: NPN open collector output with ABZ 3 signals Output wave form: Square wave Maximum shaft speed: 6000 rpm Protection: IP54 Current consumption: ~150 mA Maximum pulse: 100 KHz Weight: about 0.25kg Operating humidity: 30 to 85% without frostConnection: Red=VCC, Black = 0V, Green = A, White = B, Yellow = Z Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope (open collector output without pull-up resistor when there is no voltage output) If you want the oscilloscope in AB two-phase output with two pull-up resistors.