【TOUGH AND DURABLE】CCTREE PETG filament combines the best properties of PLA and ABS, offering excellent durability and high impact resistance. Ideal for printing various mechanical parts, holders, clamps, and 3d printer parts 【Tangle-Free & Neatly Wound】We ensure that every PETG filament is tightly and neatly wrapped by utilizing full mechanical winding, which effectively minimizes tangles, filament snapping, and line breakage 【Recommend Settings】We recommend printing the PETG filament at a nozzle temperature of 220-260°C (428-500°F), bed temperature of 50-70°C (122-158°F). Support high-speed printing, the printing speed can reach 300mm/s 【Wide Compatibility】Perfectly compatible with most 1.75mm FDM 3D printers on the market. such as Bambu Lab X1/X1C/P1P/P1S/A1, ELEGOO Neptune 3 Pro/Neptune 4 Max, ANYCUBIC Kobra 2 Neo, AnkerMake M5C, Creality K1C/K1/K1 MAX, Creality Ender 3 V3 SE/Ender 3/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V3 KE/Ender-3 Max Neo, etc 【Vacuumed Sealed Packaging】Comes in a sealed vacuum bag with a desiccant bag to keep it dry and prevent dust and foreign particles, no bubbles, and is easy to print. Please use it as soon as possible after unpacking, and dry it thoroughly before using it again CCTREE PETG 3D Printer Filaments are using 100% virgin and environmental friendly resin and colorants. CCTREE does not include any cheap plastic fillers or regrind. The filament is vacuum sealed with desiccant to protect it from moisture. The printing temperature of PETG is higher than PLA. Be sure to print with a heating bed, and in a well-ventilated space.

CCTREE is using advanced spooling technique aiming to make orderly wind and tangle-free filament. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm. It is the official partner of Creality CR-10S. Also, It is the " default " recommended filaments for many desktop and industrial 3D printers. It has the following characteristics:

Good toughness, high strength, high durability and a capacity to withstand high temperatures.
Without nozzle clogging, Easy stick to the hot bed applied with washable glue stick or craft glue
Low shrinkage, thermoforming dimensional stability


The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere.

Diameter: 1.75 mm
Default nozzle Diameter: 0.4mm
Tolerance: ± 0.03mm
Extruder Type: Direct Drive/Bowden Tube
Net Weight: 1 kg
Layer Height: 0.1-0.3 mm
Shipping Weight: 1.2 kg
Printing Temperature: 220-240°C (428-464°F)
Shipping Size: 21 x 21 x 7 cm
Bed Temperature: 50-70°C (122-158°F)
Tensile Strength: 50 Mpa
Cooling Fan: Required
Impact Strength: 7.9 J/m2, Izod
Retraction Speed: 30-50 mm/s
Surface finish: Glossy & Translucent
Retraction Distance: 3-8 mm
Spool Size: Diameter 195mm + inner hub 55mm + height 60mm