【High-Quality TPU Material】Thermoplastic Polyurethane (TPU) is a flexible, abrasion-resistant thermoplastic. this filament offers excellent flexibility, elasticity, and impact resistance — ideal for parts that need to bend or compress. 【Shore Hardness 95A】Balanced softness and durability allow for printing wearables, phone cases, seals, gaskets, and vibration-damping parts with strong layer bonding. 【Smooth Feeding & Tangle-Free】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, no deformation, easy handling, resulting in an outstanding surface finish and are highly precise. 【TPU Recommend Settings】We recommend printing at a nozzle temperature of 230 - 240°C (446-464°F), bed temperature of 40-50°C (104-112°F), printing speed of 20-40mm/s((Set slow printing rate is important for TPU materials). 【Wide Compatibility】Works with most FDM 3D printers supporting flexible filaments, If you have any product quality problems, don't hesitate to contact us, we hope to solve your problem within 24 hours. CCTREE is using advanced spooling technique aiming to make orderly wind and tangle-free filament. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of ± 0.03mm. It is the official partner of Creality 3D. Also, It is the ” default ” recommended filaments for many desktop and industrial 3D printers. It has the following characteristics:

Rubber-like, soft and stretchable. High resistance to chemical and UV exposure, as well to heat
Without nozzle clogging, Easy stick to the hot bed applied with washable glue stick or craft glue


The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere.

Base Material: TPU
Diameter: 1.75 mm
Tolerance: ± 0.03mm
Net Weight: 1 kg
Loop Length: 315 m
Spool Size: Diameter 195mm + inner hub 55mm + height 60mm
Shipping Weight: 1.2 kg
Shipping Size: 21 x 21 x 7 cm
Specific Gravity: 0.98 g/cm3
Tensile Strength: 50 Mpa
Impact Strength: >3 KJ/m2, Izod
Hardness: 90-95 SHORE A
Surface finish: Glossy
Transparency: Opaque
Processability: Fair
Printing Parameters


The information is given for reference only, adjust to the demand of users.

Extruder Type: Direct Drive/Bowden Tube
Layer Height: 0.1-0.4 mm
Fill Density: 100%
Printing Speed: 20-40 mm/s (Set slow printing rate is important for TPU materials)
Printing Temperature: 230 - 240°C (446-464°F)
Bed Temperature: 0-50°C (32-112°F) ;
Recommended Bed Temperature: 40-50°C (104-112°F)
Retraction Speed: 20-55 mm/s
Retraction Distance: 3-8 mm
Default nozzle Diameter: 0.4mm