P-PMC Single axis motion controller: It can achieve a variety of complex operation: positioning control and non-positioning control; The maximum output frequency: 40KHz; Output frequency resolution: 1Hz; Display digits: 8 digital display Signal input/output: Programmable maximum number of rows: 99; Signal input: 6 optical isolation;Signal output: 3 optical isolation; A continuous displacement range: -7,999,999-7,999,999; Operating state: Auto-run mode, manual operation, the program edit mode, parameter setting status; Lifting speed curve: 2 optimization Program editing functions: You can insert, delete, modify the program. The controller can identify the error Instruction; Return to Zero features: It can return to zero from the positive and negative directions automatically The number of programming instructions: 14 Parameter setting functions: Starting frequency, acceleration and deceleration curve, reverse clearance, manually run length, manual speed, back to zero speed and interrupt jump the line all can be set More Functions: Manual/automatic status display, run/stop status display, the number of steps/counts / procedures display, edit the program, parameter display, input/output status display, pulse and direction display

Package included:

1x Single axis motion programmable controller

1x Universal plug converter

Front panel:

1. 8 digital led Segment displays;                            

2. 6 input status indicator;

3. 3 output status indicator;                          

4. CP pulse signal indicator;                                  

5. CW direction signal indicator;

6. Keys: Total 10 keys, and most of the composite keys,

(In the eglish manual will have detail instructions)

 

This controller adopts embedded instrument shell

small size and light weight (500g)

the front panel is 71mm×71mm square, and the length is 120mm. The specific dimensions are shown in the figure below.

The maximum output frequency: 40KHZ;

Output frequency resolution: 1Hz;

Programmable maximum number of rows: 99;

Signal input: 6 (optical isolation);

Signal output: 3 (optical isolation);

A continuous displacement range: -7,999,999 ~ 7,999,999;

Operating state: Auto-run mode, manual operation, the program edit mode, parameter setting status;

Lifting speed curve: 2 (optimization);

Auto-run feature: You can edit, you can control the start and stop operation ect. automatically through the panel buttons and adding switches that connected to the back of the terminals;Manual operation functions: position adjustment (manual jog speed and jog the number of steps can be set);