SELECTED MATERIAL: This PV combiner box is made of high quality ABS and PC material, which is impact resistant, abrasion resistant, breakage resistant, and well insulated, and it can protect your equipment well in harsh environments to ensure durability. The PV converter box is compatible with any brand of solar panels and comes with solar connectors to meet your usage needs. PROFESSIONAL AND POWERFUL: The solar combiner box simplifies the connection and convergence of PV modules. Solar panel disconnect switch is used to reduce the connection between the PV array and the inverter, optimize the system structure, facilitate the disconnection of circuits during maintenance, and reduce the scope of outages in the event of a PV system failure. The PV converter box will enable the PV system to reach the optimum condition and increase the output power. HIGH SAFETY: Our solar disconnect switch adopts 6 strings of fuses rated at 15A, surge protection device and 550V 63A circuit breaker with short circuit/lightning surge/overvoltage/overcurrent protection/earth protection, which can avoid damaging the PV panels and inverters in the event of a fault. The LED indicator on the fuse holder shows the status of the fuse in time for replacement. WIDE APPLICATION: This combiner box for solar panels is suitable for PV grid-connected/off-grid solar power system, solar panel system, PV array, RV solar power generation and household solar panel system, mainly used with solar panels in office buildings, industrial plants, residential buildings, carports and so on. It can support solar panel systems with a maximum power of 720 watts in a 12V system, 1440 watts in a 24V system, and 2880 watts in a 48V system. EASY INSTALLATION AND WIRING: The solar breaker box is equipped with plug-and-play and pre-connected cables that provide an easy solution for connecting solar panels, saving at least 1-2 hours of manual wiring time. The PV disconnect switch has 4 mounting plates and can be mounted on any common surface. A built-in earth wire connector can be used to install an earth wire. It is IP65 rated, waterproof and dust-proof and can be used in harsh environments without frequent replacement.
Specification
Color: White
Material: ABS, PC
Style: Modern
Circuit Breaker Type: Standard
Mounting Type: Wall Mount
Operating Temperature: -30~70℃/-22~158℉
Input: 6 Strings
Output: 1 String
Number Of Poles: 6
Current Rating: 63A
Number Of Max. Connection PV Array: 6
Max. Input Current of Single PV Array: 15A
Total Input Current of PV Array: 90A
Max Input Voltage of Single PV Array: 1000V
Max Output Voltage: 600V
Protection Grade: IP65
Relative Humidity: 0-95%, No Condensation
Cooling Method: Natural Cooling
Number of Surge Protection Devices: 1
Surge Protection Device: 40KA, 600V
Number of Circuit Breakers: 1
Circuit Breaker: 63A, 550V
Product Size: 27*15*39cm/10.6*5.9*15.35inch
Package Size: 35*25*15cm/13.78*9.84*5.9inch
Net Weight: 3.2kg/7.05 lbs
Gross Weight: 3.5kg/7.7 lbs
Package Included
1* PV Combiner Box
1* Combination Lock
4* Mounting Plates
Other Accessories for Assembly
Notes
1. The green indicator on the surge protection devices means a normal state. Once it turns "red", please remember to replace it with a new surge protection device.
2.Please let the professional electrical engineer carry on connecting line.
3.Please pay attention to electricity safety.
4.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
