Specification:
Brand: HANGKAI
Displacement: 246CC
Short shaft 40cm
Gear ratio: 2.08(27:13)
Cylinder: 2
Max.Output(kw): 13.2
Max.speed(r/min): 5000-6000
Gear Positions: F-N-R
Packing size: 133x71x38.5cm
Ignition System: CDI
Cooling System: Water-cooling
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 38.6/49.5
Bore x Stroke(mm): 56x50
Recommended Propeller range: 3 -9"1/4''x8"
Mixing ratio: Fuel:oil=50:1
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3x33.2x105.3
Standard fuel tank capacity: 24L
How to Use:
Firstly, Fill the gear oil (open gear box lid and fill it).
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
Thirdly, Fill engine oil don't exceed the head of the pattern.
Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.
Then, Rapidly pull the starter line.
After the motor start, please turn the throttle to running state.
Then, it can be operated now.
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1.Start the motor in the water.
2.Use the motor when it stop cyling water.
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
No ratings. Be the first to rate
customer ratings
Share your thoughts with other customers