Extra-low motor noise offers excellent quietness. Industrial-grade Stepper Driver. Suit for 3-Phase Nema 17, 23 and 34 Stepper Motor. Output Current: 1.0 ~ 8.0A, Supply Voltage: 18 ~ 50VDC. Application areas: engraving machine, filature, wire-stripping machine, marking machine, cutting machine, die bonder, plotter, numerical control machine, automatic assembly equipment etc. Overview:
Smartrayc 3DM580S Digital 2-phase Stepper drive is based on TI’s 32-bit DSP platform and integrated with the micro-stepping technology and the auto tuning of power-up parameters. With the features of low noise, low vibration, low heating and high-speed high torque output, it is suitable for most stepper motors.
Key Features:
* Anti-Resonance provides optimal torque and nulls mid-range instability
* Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
* Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
* 16 Pulse/Rev: 400-25600
* Soft-start with no “jump” when powered on
* 8 selectable peak current including 1.00A to 8.00A
* Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
* Automatic idle-current reduction
* Suitable for 3-phase motors
* Support PUL/DIR mode
* Over-voltage and over-current protections
Electrical Specifications:
* Output Peak Current: 1.0~8.0A
* Input Voltage: +18~50VDC (Typical 36VDC)
* Logic Signal Current: 7~16mA (Typical 10mA)
* Pulse Input Frequency: 0~800kHz
* Pulse Width: 2.5μS
* Cooling: Natural Cooling or Forced cooling
* Environment: Avoid dust, oil fog and corrosive gases
* Operating Temperature: -10℃~45℃
* Vibration: 10-55Hz / 0.15mm
* Weight: Approx.285g (10.0oz)
Packing List:
1 x Stepper Motor Driver 3DM580S
Smartrayc 3DM580S Digital 2-phase Stepper drive is based on TI’s 32-bit DSP platform and integrated with the micro-stepping technology and the auto tuning of power-up parameters. With the features of low noise, low vibration, low heating and high-speed high torque output, it is suitable for most stepper motors.
Key Features:
* Anti-Resonance provides optimal torque and nulls mid-range instability
* Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
* Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
* 16 Pulse/Rev: 400-25600
* Soft-start with no “jump” when powered on
* 8 selectable peak current including 1.00A to 8.00A
* Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
* Automatic idle-current reduction
* Suitable for 3-phase motors
* Support PUL/DIR mode
* Over-voltage and over-current protections
Electrical Specifications:
* Output Peak Current: 1.0~8.0A
* Input Voltage: +18~50VDC (Typical 36VDC)
* Logic Signal Current: 7~16mA (Typical 10mA)
* Pulse Input Frequency: 0~800kHz
* Pulse Width: 2.5μS
* Cooling: Natural Cooling or Forced cooling
* Environment: Avoid dust, oil fog and corrosive gases
* Operating Temperature: -10℃~45℃
* Vibration: 10-55Hz / 0.15mm
* Weight: Approx.285g (10.0oz)
Packing List:
1 x Stepper Motor Driver 3DM580S