𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲 𝐚𝐧𝐝 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: Our Cloudray 100 watt laser power supply for Laser Tubes boasts exceptional compatibility, working seamlessly with 80-100W laser tubes from various manufacturers. With its quick response speed and high-performance capabilities, this power supply delivers impressive cutting power while prolonging the service life of your laser tube. 𝐄𝐟𝐟𝐨𝐫𝐭𝐥𝐞𝐬𝐬 𝐂𝐨𝐧𝐭𝐫𝐨𝐥 𝐚𝐧𝐝 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧: Experience easy control over your laser operations with our power supply's TTL level start and stop functionality. Additionally, it features essential safety measures such as output open circuit protection, TTL signal indication, water through signal indication, and laser output indication. It even includes a convenient button to manually check the output laser, ensuring peace of mind and smooth operation. 𝐒𝐮𝐩𝐞𝐫𝐢𝐨𝐫 𝐂𝐮𝐭𝐭𝐢𝐧𝐠 𝐚𝐧𝐝 𝐒𝐜𝐮𝐥𝐩𝐭𝐢𝐧𝐠: Unlock the potential of your artistic creativity with our power supply, perfect for sculpting and cutting various materials like acrylic, fabric, double color sheets, and rubber. Experience the precision and power needed to bring your artistic visions to life with ease and confidence. 𝐎𝐮𝐭𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 𝐚𝐧𝐝 𝐑𝐞𝐥𝐢𝐚𝐛𝐢𝐥𝐢𝐭𝐲: Our CO2 Power Supply is equipped with an External Ammeter featuring an LCD screen. This convenient addition allows for real-time monitoring of the processing current and information status. The LCD screen is designed with a trimmer potentiometer, enabling precise adjustments to the current as needed. 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐀𝐫𝐞𝐚𝐬: This power supply is designed to excel in a wide range of applications. From intricate sculptures to detailed cuts on acrylic, fabric, double color sheets, and rubber, our power supply brings versatility and efficiency to your creative projects. Embrace the possibilities and elevate your craftsmanship to new heights.

Features:

1. Zero-current half-bridge soft-switching circuit. High efficiency and fast response. Match various 

manufacturers of laser tubes.

2. Simple Port Control,TTL level signals can control the laser start/stop.

3. Protection switch is to check the outside water, ventilation, etc.

4. Laser Power Adjustment: input 0V to 5V analog signal, can also input PWM signal.

5. Open Circuit Protection Function: avoid the damage to laser power supply due to laser tube burst.

6. Factory Aging check:: 1. Each power supply will go through 60℃ and 12 hours aging check under full load. 2. 500 times 7 seconds Start / Stop check.

Connection:

1.Laser Tube connection: (Refer to Power supply and laser Device's connection Diagram) High voltage terminal of MYJG-100 power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly.

2.Connection of control signal( Refer to Power supply and control board's connection Diagram) The control signal shall be reliably connected to control terminal of the power supply MYJG-100,after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal whether correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and protection switch WP connection is correct at same time.

3.  Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosure protection and so on.