【Unlock Specialized for Toyota & Subaru Wheel Options】The primary reason for using these 20mm adapters is to convert your vehicle’s 5x114.3 (5x4.5") bolt pattern to the 5x100 pattern. This enables owners of for Honda and for Acura models to mount specialized wheels typically found on compatible with Toyota or compatible with Subaru models, while the 20mm thickness provides a flush, aggressive stance. 【Bore Conversion & Stability】These adapters serve the vital purpose of bridging a 64.1mm vehicle hub to wheels with a smaller 54.1mm center bore. The hub-centric design ensures the wheel load is supported by the hub rather than just the studs, effectively eliminating high-speed steering wheel vibrations and maintaining a factory-smooth ride on compatible for Honda cars. 【MANDATORY STUD TRIMMING】Safety Warning: At 20mm thickness, your factory wheel studs WILL protrude past the surface of the adapter. If your new wheels do not have deep internal cavities (pockets) to hide these studs, you MUST trim or shorten the factory studs. A 100% flush mount is mandatory; if the wheel rests on the stud tips, the hardware will snap. 【Vehicle Fitment Range】Specifically engineered for vehicles with a 5x114.3 bolt pattern, 64.1mm center bore, and M12x1.5 thread pitch. This kit is compatible for Honda Civic (06-26), fits Honda Accord (98-26), fits Honda CR-V (97-26), compatible with Acura TL (99-08), and fits Acura TSX (04-14). 【Forged Aerospace Grade & 10.9 Studs】Precision-crafted from Forged Aerospace-Grade 6061-T6 Aluminum Alloy for maximum structural integrity. Equipped with integrated Class 10.9 Heat-Treated Carbon Steel Studs in a M12x1.5 thread pitch, providing the high tensile strength required for performance street driving and reliable daily use.

Precision Pattern Conversion For 5x114.3 Hubs to 5x100 Wheels

The Customadeonly 20mm Forged Hubcentric Wheel Adapters serve two vital purposes: they bridge the gap between your vehicle's 5x114.3 bolt pattern and the 5x100 wheel pattern, and they provide a 25mm offset to improve handling stability. This is the ultimate solution for mounting specialized aftermarket wheels on compatible for Honda or fits Acura platforms.

Optimized Hubcentric Bore Conversion

These adapters enable vehicles with a 64.1mm hub to safely mount wheels with a smaller 54.1mm center bore. By maintaining a strictly hub-centric state, the weight of the vehicle is properly supported, significantly reducing stress on the hardware and eliminating high-speed vibrations common with non-centric spacers on compatible with Honda cars.

Forged Strength for Daily Performance

CNC-machined from Forged Aerospace-Grade 6061-T6 Aluminum Alloy, these adapters offer an elite strength-to-weight ratio. The Grade 10.9 M12x1.5 Studs ensure your wheels are mounted with higher tensile strength than standard cast spacers, making them durable enough for performance driving on for Acura and compatible for Honda models.

INSTALLATION SAFETY GUIDE

The Flush Fit: Ensure the hub surface is clean. The adapter must seat 100% flat against the hub. If the factory studs protrude and hit the back of the wheel, they MUST be trimmed.

The Paper Test: Once the wheel is mounted, slide a piece of paper between the wheel and adapter. If it moves, the fit is NOT flush and is NOT safe to drive.

Torque Specs: Use a calibrated torque wrench. Never use an impact wrench for final tightening. Re-torque hardware after the first 50 miles.

Specific Fitment Configuration

Hub Side: 5x114.3
64.1mm Bore

Wheel Side: 5x100
54.1mm Hubcentric Lip

Vehicle Compatibility:fits Honda Civic/Accord/CR-V, compatible with Acura TL/TSX/RSX.