General grade PC material (polycarbonate) is suitable for ETO ethylene oxide and steam sterilization at 121 ° Biocompatibility meets most ISO 10993-1 test requirements; RoHS compliance Maximum operating temperature: 130 ℃ Industrial grade PPS material (polyphenylene sulfide) is one of the best varieties of engineering plastics in terms of heat resistance Medical grade PSU material (alum polysulfone) Oxidation and hydrolysis resistance, antistatic performance, resistance to mineral acid, alkali and salt solutions. Good resistance to detergents and hydrocarbon oils Pump Tube Selection: 25# (ID4.8mm*OD8mm), 15# (ID4.8mm*OD9.6mm), 17# (ID6.4mm*OD9.6mm), 24# (ID6.4mm*OD11.2mm), 18# (ID7.9mm*OD11.1mm), 35# (ID7.9mm*OD12.7mm) Buffer chamber volume: 6.36 ml, Connector material: SUS316

◆D1606-6B-PC

◆Base material: PC

◆Buffer film material: silica gel

◆Joint material: SUS316

◆Temperature resistance: < 130℃

◆Withstand voltage: 0.3 Mpa

◆The outer diameter of the joint is 7.0mm and the inner diameter is 4.9mm

◆Applicable to pump pipe 25# 15# 24#

◆ D1606-6B-PPS

◆Base material: PPS

◆Buffer film material: silica gel

◆Joint material: SUS316

◆Temperature resistance: < 220℃

◆Withstand voltage: 0.3MPa

◆The outer diameter of the joint is 7.0mm and the inner diameter is 4.9mm

◆Applicable to pump pipe 25# 15# 24#

◆ D1606-6B-PSU

◆Base material: PSU

◆Buffer film material: silica gel

◆Joint material: SUS316

◆Temperature resistance: ≤175℃

◆Withstand voltage: 0.3MPa

◆The outer diameter of the joint is 7.0mm and the inner diameter is 4.9mm

◆Suitable for pump pipe 25#15#24#

◆ D1606-6D-PC

◆Base material: PC

◆Buffer film material: silica gel

◆Joint material: SUS316

◆Temperature resistance: < 130℃

◆Withstand voltage: 0.3 Mpa

◆The outer diameter of the joint is 9.8mm and the inner diameter is 6.6mm

◆Suitable for pump pipe 17# 18# 24# 35#

◆D1606-6D-PPS

◆Base material: PPS

◆Buffer film material: silica gel

◆Joint material: SUS316

◆Temperature resistance: < 220℃

◆Withstand voltage: 0.3MPa

◆The outer diameter of the joint is 9.8mm and the inner diameter is 6.6mm

◆Suitable for 17# 18# 24# 35#

◆D1606-6D-PSU

◆Base material: PSU

◆Buffer film material: silica gel

◆Temperature resistance: ≤175℃

◆Withstand voltage: 0.3MPa

◆Suitable for 17# 18# 24# 35#