🔧【Upgraded Tile Leveling System Kit】DTNESS tile leveler spacers adopt a brand new PVC material, which can be used for a long time and is not easily deformed. System is engineered for both wall and floor tiles, ensuring flatness and preventing movement during the mortar setting process. The tile leveler clips are more thicker, which has a high bearing capacity, easy to clamp, and the level of the base is consistent, it can align the tiles horizontally and smoothly before the cement sets. 🔧【Improved Efficiency and Aesthetics】1/16'' tile leveling system kit can be easily installed and helps DIY and Pro tile layers increase the efficiency of laying tiles, delivering a flawless, lippage-free finish while saving time. It simplifies the process of leveling, aligning, spacing, and securing tiles in place, ensuring flatness and preventing movement during the mortar setting process. This results in impeccable outcomes and the correction of any tile bowing to obtain a perfect non-slip surface finish. 🔧【Easy to Use】Tile leveler spacers does not require other assembly tools, tile spacers leveling system can be used for floors/walls/stones. You can put the 1/16" tile leveling clips into the tile bottom, slide clips under the tile and into the mortar, then place the second tile. After that, you can insert the tile leveling caps and rotary leveling. Wait 24 hours, kick the tile leveler clips out or use rubber mallet out. 🔧【Reusable Caps】100 Pcs reusable caps, the cap allows for a 1/16" minimum grout joint, and it firmly holds the tile in place save your money and time for tile installation. This is the most economical tile leveling system available (1 tile requires 4 caps and 4 spacers ). 🔧【Package Includes】The tile leveling system kit include 300 Pcs 1/16"(1.5mm) tile leveler spacers clips+100 Pcs reusable tile leveler caps +1 Pc rubber mallet. The best gift for professionals and DIYs who want to install the tile of wall and floor! Description:
Ensure the tile balance on the same horizontal position.
Prevent tiles from moving while curing.
Reduce the time for grinding and polishing.
Improve tile installation speed and reduce installer fatigue/stress.
Tile caps can be reused ,which extend the service life of tile leveling system kit and economical for you.
Tile leveling spacers clips are disposable, easy to install and remove, you can kick the tile leveler clips out or use rubber mallet out.

Specifications:
Material: PP Plastic Material
Minimum Tile Gap: 1/16"(1.5mm)
Tile Thickness: 1/8"(3mm) to 1/2"(12mm)
Application: for floor/wall tile setting

How to Use:
1.Put the clip into the tile bottom.
2.Slide clips under the tile and into the mortar,then place the second tile.
3.Insert the cap and push it.
4.One tile set up with 4 clips and caps.
5.Kick them out or use rubber mallet out after 24 hours.
6.The clips are disposable and the caps can be reused.

Package :
300 Pcs 1/16"(1.5mm) tile leveler spacers clips
100 Pcs reusable tile leveler caps
1 Pc rubber mallet

Note:After the construction, please clean up the cement next to the clips inside the brick joints, if the cement covers the clips, then when the cement dries out, the clips will not be easy to break from the bottom, if it breaks from the middle part, there will be part of the clips left in the brick joints, and it is difficult to clean, please be careful when using!