【Compatibility】TOVEN-RV honeywell M847D series damper motor is compatible with Honeywell's M847D1004, M847D1012 popular ARD and ZD series of damper motors. These motors also replace most Honeywell 2 wire normally open, power to close spring return motors, as well as many other brands; and also replace the Hansen 135-6 motor, as well as other brands with the same footprint. Does not work with Honeywell ZD Rectangular Dampers. Please check the fitments before ordering! 【Functions】24Vac spring return damper actuator is designed to operate directly driven zone dampers, used to contol air fow in ducts. The synchronous motor acuator can be driven open (or chosed) using any 24 wolt rated two position switch - eg.a wall swith or a thermostat subbase switch. The M847D replaces the RDMH andR DMZ damper actuators for use on TrolA-Temp@ ARD and ZD dampers. 【Easy Installation】Can be used in either Normally Open (N.O.) HVAC air ducts, or Normally Closed (N.C.) venting installations. replacement damper motor for honeywell is an ideal replacement for the Honey Well model! Installation is pretty straight forward. Mounting Means: direct connection to damper shaft; Mounting Position: Multi-poise. 【Specifications】Electrical Rating: 24 Vac 60 Hz 0.32 Amp., 8 VA; Electrical Connection: 1/2' conduit; Nominal Angular Rotation: 90* (max. 105% ); Torque: Min. 423 mNm (milli newton meter) (60 in.oz) output torque available when motor is energized and device is at the spring returned initial sta rt position.; Energized at rated load - 30 seconds; De-energized (spring return) - 10 seconds; Direction of Shaft Rotation: clockwise, when energized and viewed from the base or shaft end. 【Reliable Quality & Service】Damper motor actuator comes with 1-Year Warranty. M847D1004 heavy-duty damper actuator motor is made of stainless steel housing and metal gears, durable and rust-resistant. Undergo strict quality tested for over 150K cycles of flawless operations. Fixed 90-degree operation angle (stroke). If you have any questions about our products or service, please feel free to contact us for replacement or refund. We will be gald to help!

TOVEN-RV VDM10 General Purpose Spring Return Damper Actuator and Motor, can Replace Honeywell M847D & Other Similar Damper Actuators, 24 VAC Without Switch

Features:
1.2-wire Spring return damper actuator motor is designed to be compatible with and drop-in replacement for following models: Honeywell's M847D, M847D1004, and old ARD and ZD series of damper motors. DuroZone #35105 damper Motor & similar HVAC spring-return 2-wire damper actuators by Zone First, Erie, and others.
2.Heavy-duty motor with all METAL gears inside, stainless steel housing. Quality tested for over 150K cycles of flawless operations. Fixed 90-degree operation angle (stroke).
3.Input power: 24 VAC, 50/60 Hz.
4.Installation: Direct coupling to 5/16" damper shaft, can be used in either Normally Open (N.O.) HVAC air ducts, or Normally Closed (N.C.) venting installations.
( Tips: Use the old set screw from the Honeywell to make installation easier! )

Applications:
HD-MOTOR - 2-WIRE, 24VAC MOTOR FOR HD SERIES DAMPERS (RDMZ) Drop-in replacement motor actuator for Honeywell M847D1004, M847D1012, and all Honeywell M847D Series Motors for ARD round dampers, RZ3-1M 680474058020. Zonefirst models ZDS, ZDB, and RTS. For normally open, as used with Honeywell and Trol-a-Temp zone control systems. 2-Wire Spring Return Actuator 24V with durable gears, and easy to remove black plastic covers. Replacement for Honeywell M847D1004, M847D1012, and all Honeywell M847D Series Motors for ARD dampers. Does not work with Honeywell ZD Rectangular Dampers. Replacement for Retrozone Replacement Damper Motor Actuator for Honeywell ARD ZD M847D 2 Wire Spring Motor RZ3-1M, 680474058020. Zonefirst replacement models ZDS, ZDB, and RTS. For use with dampers that are normally open, as used with Honeywell and Trol-a-Temp zone control systems.
( ATTENTION: Please check the fitments before ordering! )