Compatible with official Nintendo Switch OLED HEG-001 console only. Replace a broken or damaged Nintendo Switch OLED power button board to fix issues with your device powering on. Repair faulty buttons which do not respond when pressed. (CAUTION: For your safety, discharge the battery below 25% before disassembling your Switch OLED.) Requires technical internal fitting: Tri-wing screwdriver required (NOt included). Each pack come with: 1x Volume & Power Button flex Cable. (Part Number: HEG-VOL-01) The console will need to be taken apart to fit this replacement product, this will void any warranty and is done at owners risk.

The Switch OLED uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws.

Note: When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however, need regular replacement thermal paste when replacing the heat sink.

Not compatible with Nintend0 Switch & Switch Lite, only suitable for Switch OLED HEG-001 models.
Part Number: HEG-VOL-01

What's in the Box:
1x Volume & Power Button flex Cable